diff options
Diffstat (limited to 'firmware')
| -rw-r--r-- | firmware/Makefile | 2 | ||||
| -rw-r--r-- | firmware/Makefile.dfu | 8 | ||||
| -rw-r--r-- | firmware/src/simtrace.h | 20 | ||||
| -rw-r--r-- | firmware/src/start/Cstartup.S | 3 |
4 files changed, 32 insertions, 1 deletions
diff --git a/firmware/Makefile b/firmware/Makefile index 9b75b3a..57c983e 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -113,6 +113,8 @@ SRCARM += src/picc/$(TARGET).c endif ifeq ($(BOARD), SIMTRACE) +SUBMDL = AT91SAM7S256 +TARGET := main_simtrace SRCARM += src/simtrace/iso7816_uart.c src/simtrace/tc_etu.c SRCARM += src/simtrace/$(TARGET).c endif diff --git a/firmware/Makefile.dfu b/firmware/Makefile.dfu index 45a042e..dbe9b35 100644 --- a/firmware/Makefile.dfu +++ b/firmware/Makefile.dfu @@ -174,6 +174,14 @@ ADEFS += -DPCD CINCS = -Isrc/pcd endif +ifeq ($(BOARD),SIMTRACE) +SUBMDL = AT91SAM7S256 +CDEFS += -DSIMTRACE +ADEFS += -DSIMTRACE +CINCS = -Isrc/simtrace +endif + + # Place -I options here CINCS += -Iinclude -Isrc diff --git a/firmware/src/simtrace.h b/firmware/src/simtrace.h index e787dff..d7faa96 100644 --- a/firmware/src/simtrace.h +++ b/firmware/src/simtrace.h @@ -4,13 +4,31 @@ #ifdef SIMTRACE #define OPENPCD_PIO_LED2 AT91C_PIO_PA17 #define OPENPCD_PIO_LED1 AT91C_PIO_PA18 -#define OPENPCD_PIO_UDP_CNX AT91C_PIO_PA24 +#define OPENPCD_PIO_UDP_CNX AT91C_PIO_PA29 #define OPENPCD_PIO_UDP_PUP AT91C_PIO_PA16 #define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID #else #error "unknown PCB" #endif +/* 7816 UART for SIM-card side */ #define SIMTRACE_PIO_CLK AT91C_PA2_SCK0 #define SIMTRACE_PIO_IO AT91C_PA6_TXD0 #define SIMTRACE_PIO_nRST AT91C_PIO_PA7 +#define SIMTRACE_PIO_SW_SIM AT91C_PIO_PA8 + +/* 7816 UART for phone side */ +#define SIMTRACE_PIO_nRST_PH AT91C_PIO_PA24 +#define SIMTRACE_PIO_CLK_PH AT91C_PIO_PA23 +#define SIMTRACE_PIO_IO_PH AT91C_PIO_PA22 + +/* bus switch for SIM card connection */ +#define SIMTRACE_PIO_SC_SW AT91C_PIO_PA20 +#define SIMTRACE_PIO_IO_SW AT91C_PIO_PA19 + +/* SPI flash */ +#define PIO_SPIF_nWP AT91C_PIO_PA15 +#define PIO_SPIF_SCK AT91C_PIO_PA14 +#define PIO_SPIF_MOSI AT91C_PIO_PA13 +#define PIO_SPIF_MISO AT91C_PIO_PA12 +#define PIO_SPIF_nCS AT91C_PIO_PA11 diff --git a/firmware/src/start/Cstartup.S b/firmware/src/start/Cstartup.S index a28b400..e262b8f 100644 --- a/firmware/src/start/Cstartup.S +++ b/firmware/src/start/Cstartup.S @@ -98,6 +98,9 @@ /* Olimex SAM7-Pxxx boards have a button B1 on PA19 that is low-active */ .equ PIO_BOOTLDR, (1 << 19) #define CONFIG_DFU_SWITCH_INV +#elif defined(SIMTRACE) + .equ PIO_BOOTLDR, (1 << 31) +#define CONFIG_DFU_SWITCH_INV #else #error please define PIO_BOOTLDR for your board #endif |