| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | SIMTRACE: ISO7816: Deal with ATR that don't have historical bytesv0.2 | Harald Welte | 2011-08-16 | 1 | -11/+21 |
| * | ISO7816: Properly handle T=0 only cards without TCK in ATR | Harald Welte | 2011-08-16 | 1 | -1/+13 |
| * | SIMTRACE UART: Reset error status on error related IRQ | Harald Welte | 2011-08-15 | 1 | -0/+9 |
| * | simtrace UART: set INACK flag to make sure we ignore any parity error | Harald Welte | 2011-08-15 | 1 | -3/+3 |
| * | DBGU: Print Reset controller Status Register on boot | Harald Welte | 2011-08-15 | 1 | -0/+4 |
| * | USB: Add support for the 3rd DFU interface (RAM) | Harald Welte | 2011-08-15 | 1 | -0/+6 |
| * | add simtrace README file | Harald Welte | 2011-07-30 | 1 | -0/+9 |
| * | update mkcompile_h to work with git repository | Harald Welte | 2011-07-30 | 2 | -4/+155 |
| * | DFU: Fix execution of software that was loaded to RAM via DFUv0.1 | Harald Welte | 2011-07-30 | 1 | -8/+17 |
| * | DFU: Support re-flashing of DFU via DFU | Harald Welte | 2011-07-30 | 2 | -18/+134 |
| * | DFU: add third 'alternate configuration' for RAM load | Harald Welte | 2011-07-30 | 8 | -10/+36 |
| * | simtrace: add some early spi flash utility routines | Harald Welte | 2011-07-30 | 3 | -1/+225 |
| * | Makefile: SIMtrace uses SAM7S128, not 256 | Harald Welte | 2011-07-30 | 2 | -2/+2 |
| * | add new RUN_FROM_RAM run-mode for direct DFU-to-RAM support | Harald Welte | 2011-07-30 | 4 | -3/+99 |
| * | use gcc/ld flags -ffunction-sections and --gc-sections | Harald Welte | 2011-07-30 | 4 | -17/+17 |
| * | sam7dfu: update copyright years | Harald Welte | 2011-07-29 | 1 | -1/+1 |
| * | sam7dfu: make sure we can use USB reset to get from DFU -> APP | Harald Welte | 2011-07-29 | 1 | -2/+14 |
| * | USB driver: use the DFU-provided function to send EP0 data | Harald Welte | 2011-07-07 | 1 | -48/+1 |
| * | dfu: fix EP0 IN trasnfers that are even multiple of 8 | Harald Welte | 2011-07-07 | 1 | -4/+14 |
| * | simtrace: initialize sniffer mode right after start-up | Harald Welte | 2011-06-30 | 1 | -18/+22 |
| * | simtrace: switch VCC_SIM into output mode, as we use it to supply Vcc | Harald Welte | 2011-06-21 | 1 | -2/+8 |
| * | simtrace: add VCC_PHINE IRQ detection | Harald Welte | 2011-06-21 | 1 | -0/+19 |
| * | simtrace: use better names for GPIO lines | Harald Welte | 2011-06-21 | 1 | -4/+5 |
| * | simtrace: introduce mode sniffer / mitm switching | Harald Welte | 2011-06-17 | 4 | -8/+74 |
| * | simtrace: add support for the analog bus switch | Harald Welte | 2011-06-16 | 5 | -3/+96 |
| * | simtrace: add more definitions regarding real hw prototype | Harald Welte | 2011-06-16 | 4 | -1/+32 |
| * | update USB strings (company name and some copy+paste mistakes) | Harald Welte | 2011-06-15 | 2 | -3/+3 |
| * | typo: Fix typo, transform reqyests to requests. | Holger Hans Peter Freyther | 2011-01-31 | 7 | -7/+7 |
| * | vsprintf.c: Fix compilation by including limits.h | Holger Hans Peter Freyther | 2011-01-31 | 1 | -0/+1 |
| * | add missing usb_strings_dfu.txt file to simtrace directory | Harald Welte | 2010-12-09 | 1 | -0/+5 |
| * | AT91SAM7.h: Fix computation of AT91C_IFLASH_LOCK_REGION_SIZE | Harald Welte | 2010-11-21 | 1 | -1/+1 |
| * | simtrace: Make sure ATR is sent in its own RCTX and we re-allocate in time | Harald Welte | 2010-11-21 | 1 | -1/+11 |
| * | simtrace: Commit Makefile changes to support build of simtrace WARNING | Harald Welte | 2010-11-18 | 2 | -6/+18 |
| * | req_ctx: Increase size of small req_ctx to 128 and have 16 instead of 8 | Harald Welte | 2010-11-18 | 2 | -3/+3 |
| * | simtrace: fix problems causing bogus waiting time expirations | Harald Welte | 2010-11-18 | 1 | -1/+5 |
| * | simtrace: Introduce code for proper handling of PTS / PPS | Harald Welte | 2010-11-18 | 1 | -12/+148 |
| * | simtrace: add TC based waiting time counter, signal ATR / expiry via USB | Harald Welte | 2010-11-18 | 7 | -80/+316 |
| * | simtrace: introduce RST pin handling | Harald Welte | 2010-11-14 | 1 | -12/+32 |
| * | Initial version of a SAM7 USART based ISO7816-3 T=0 sniffer | Harald Welte | 2010-11-14 | 6 | -2/+529 |
| * | enable USB string descriptors | Harald Welte | 2010-11-14 | 1 | -1/+1 |
| * | disable USB EP0 debugging | Harald Welte | 2010-11-14 | 1 | -1/+1 |
| * | Use smaller number of request contexts on a SAM64 | Harald Welte | 2010-11-13 | 1 | -0/+5 |
| * | On the Olimex board, the buttons are low-active | Harald Welte | 2010-11-13 | 1 | -1/+7 |
| * | AT91SAM7S: Fix linker script (stack) for 64kByte flash version | Harald Welte | 2010-11-13 | 1 | -1/+1 |
| * | mark _ctype as const to be able to put it in flash | Harald Welte | 2010-11-13 | 2 | -2/+2 |
| * | add linker scripts for AT91SAM7S64 (64kByte flash / 16kByte RAM) variant | Harald Welte | 2010-11-12 | 2 | -0/+210 |
| * | fix STAT_ERR/STAT_IRQ bit definition error in RC632 STATUS register definition | laforge | 2008-05-24 | 1 | -2/+2 |
| * | * move usb descriptors into separate file (src/os/usb_descriptors_openpcd.h) | laforge | 2008-02-23 | 7 | -98/+556 |
| * | allow GETSTATE and GETSTATUS requests in MANIFEST state (compatibility with d... | laforge | 2008-02-17 | 1 | -3/+19 |
| * | fix USB strings: OpenPCD is a RFID Reader, not a simulator | laforge | 2008-02-17 | 2 | -2/+2 |
