diff options
Diffstat (limited to 'openpcd/firmware/lib/lib_AT91SAM7.c')
| -rw-r--r-- | openpcd/firmware/lib/lib_AT91SAM7.c | 405 |
1 files changed, 0 insertions, 405 deletions
diff --git a/openpcd/firmware/lib/lib_AT91SAM7.c b/openpcd/firmware/lib/lib_AT91SAM7.c deleted file mode 100644 index 950761f..0000000 --- a/openpcd/firmware/lib/lib_AT91SAM7.c +++ /dev/null @@ -1,405 +0,0 @@ -//* ---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//* ---------------------------------------------------------------------------- -//* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR -//* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -//* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE -//* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, -//* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -//* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, -//* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -//* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -//* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -//* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -//* ---------------------------------------------------------------------------- -//* File Name : lib_AT91SAM7S64.h -//* Object : AT91SAM7S64 inlined functions -//* Generated : AT91 SW Application Group 08/30/2005 (15:52:59) -//* - -#include <sys/types.h> -#include <include/AT91SAM7.h> -#include <include/lib_AT91SAM7.h> - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_ConfigureIt -//* \brief Interrupt Handler Initialization -//*---------------------------------------------------------------------------- -unsigned int AT91F_AIC_ConfigureIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id, // \arg interrupt number to initialize - unsigned int priority, // \arg priority to give to the interrupt - unsigned int src_type, // \arg activation and sense of activation - void (*newHandler) () ) // \arg address of the interrupt handler -{ - unsigned int oldHandler; - unsigned int mask ; - - oldHandler = pAic->AIC_SVR[irq_id]; - - mask = 0x1 << irq_id ; - //* Disable the interrupt on the interrupt controller - pAic->AIC_IDCR = mask ; - //* Save the interrupt handler routine pointer and the interrupt priority - pAic->AIC_SVR[irq_id] = (unsigned int) newHandler ; - //* Store the Source Mode Register - pAic->AIC_SMR[irq_id] = src_type | priority ; - //* Clear the interrupt on the interrupt controller - pAic->AIC_ICCR = mask ; - - return oldHandler; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_SetExceptionVector -//* \brief Configure vector handler -//*---------------------------------------------------------------------------- -unsigned int AT91F_AIC_SetExceptionVector ( - unsigned int *pVector, // \arg pointer to the AIC registers - void (*Handler) () ) // \arg Interrupt Handler -{ - unsigned int oldVector = *pVector; - - if ((unsigned int) Handler == (unsigned int) AT91C_AIC_BRANCH_OPCODE) - *pVector = (unsigned int) AT91C_AIC_BRANCH_OPCODE; - else - *pVector = (((((unsigned int) Handler) - ((unsigned int) pVector) - 0x8) >> 2) & 0x00FFFFFF) | 0xEA000000; - - return oldVector; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_Open -//* \brief Set exception vectors and AIC registers to default values -//*---------------------------------------------------------------------------- -void AT91F_AIC_Open( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - void (*IrqHandler) (), // \arg Default IRQ vector exception - void (*FiqHandler) (), // \arg Default FIQ vector exception - void (*DefaultHandler) (), // \arg Default Handler set in ISR - void (*SpuriousHandler) (), // \arg Default Spurious Handler - unsigned int protectMode) // \arg Debug Control Register -{ - int i; - - // Disable all interrupts and set IVR to the default handler - for (i = 0; i < 32; ++i) { - AT91F_AIC_DisableIt(pAic, i); - AT91F_AIC_ConfigureIt(pAic, i, AT91C_AIC_PRIOR_LOWEST, AT91C_AIC_SRCTYPE_HIGH_LEVEL, DefaultHandler); - } - - // Set the IRQ exception vector - AT91F_AIC_SetExceptionVector((unsigned int *) 0x18, IrqHandler); - // Set the Fast Interrupt exception vector - AT91F_AIC_SetExceptionVector((unsigned int *) 0x1C, FiqHandler); - - pAic->AIC_SPU = (unsigned int) SpuriousHandler; - pAic->AIC_DCR = protectMode; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_Open -//* \brief Open PDC: disable TX and RX reset transfer descriptors, re-enable RX and TX -//*---------------------------------------------------------------------------- -void AT91F_PDC_Open(AT91PS_PDC pPDC) // \arg pointer to a PDC controller -{ - //* Disable the RX and TX PDC transfer requests - AT91F_PDC_DisableRx(pPDC); - AT91F_PDC_DisableTx(pPDC); - - //* Reset all Counter register Next buffer first - AT91F_PDC_SetNextTx(pPDC, NULL, 0); - AT91F_PDC_SetNextRx(pPDC, NULL, 0); - AT91F_PDC_SetTx(pPDC, NULL, 0); - AT91F_PDC_SetRx(pPDC, NULL, 0); - - //* Enable the RX and TX PDC transfer requests - AT91F_PDC_EnableRx(pPDC); - AT91F_PDC_EnableTx(pPDC); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_Close -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -void AT91F_PDC_Close(AT91PS_PDC pPDC) // \arg pointer to a PDC controller -{ - //* Disable the RX and TX PDC transfer requests - AT91F_PDC_DisableRx(pPDC); - AT91F_PDC_DisableTx(pPDC); - - //* Reset all Counter register Next buffer first - AT91F_PDC_SetNextTx(pPDC, NULL, 0); - AT91F_PDC_SetNextRx(pPDC, NULL, 0); - AT91F_PDC_SetTx(pPDC, NULL, 0); - AT91F_PDC_SetRx(pPDC, NULL, 0); - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SendFrame -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -unsigned int AT91F_PDC_SendFrame( - AT91PS_PDC pPDC, - const unsigned char *pBuffer, - unsigned int szBuffer, - const unsigned char *pNextBuffer, - unsigned int szNextBuffer ) -{ - if (AT91F_PDC_IsTxEmpty(pPDC)) { - //* Buffer and next buffer can be initialized - AT91F_PDC_SetTx(pPDC, pBuffer, szBuffer); - AT91F_PDC_SetNextTx(pPDC, pNextBuffer, szNextBuffer); - return 2; - } - else if (AT91F_PDC_IsNextTxEmpty(pPDC)) { - //* Only one buffer can be initialized - AT91F_PDC_SetNextTx(pPDC, pBuffer, szBuffer); - return 1; - } - else { - //* All buffer are in use... - return 0; - } -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_ReceiveFrame -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -unsigned int AT91F_PDC_ReceiveFrame ( - AT91PS_PDC pPDC, - unsigned char *pBuffer, - unsigned int szBuffer, - unsigned char *pNextBuffer, - unsigned int szNextBuffer ) -{ - if (AT91F_PDC_IsRxEmpty(pPDC)) { - //* Buffer and next buffer can be initialized - AT91F_PDC_SetRx(pPDC, pBuffer, szBuffer); - AT91F_PDC_SetNextRx(pPDC, pNextBuffer, szNextBuffer); - return 2; - } - else if (AT91F_PDC_IsNextRxEmpty(pPDC)) { - //* Only one buffer can be initialized - AT91F_PDC_SetNextRx(pPDC, pBuffer, szBuffer); - return 1; - } - else { - //* All buffer are in use... - return 0; - } -} - -//*------------------------------------------------------------------------------ -//* \fn AT91F_PMC_GetMasterClock -//* \brief Return master clock in Hz which correponds to processor clock for ARM7 -//*------------------------------------------------------------------------------ -unsigned int AT91F_PMC_GetMasterClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - unsigned int reg = pPMC->PMC_MCKR; - unsigned int prescaler = (1 << ((reg & AT91C_PMC_PRES) >> 2)); - unsigned int pllDivider, pllMultiplier; - - switch (reg & AT91C_PMC_CSS) { - case AT91C_PMC_CSS_SLOW_CLK: // Slow clock selected - return slowClock / prescaler; - case AT91C_PMC_CSS_MAIN_CLK: // Main clock is selected - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / prescaler; - case AT91C_PMC_CSS_PLL_CLK: // PLLB clock is selected - reg = pCKGR->CKGR_PLLR; - pllDivider = (reg & AT91C_CKGR_DIV); - pllMultiplier = ((reg & AT91C_CKGR_MUL) >> 16) + 1; - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; - } - return 0; -} - -//*-------------------------------------------------------------------------------------- -//* \fn AT91F_RTT_ReadValue() -//* \brief Read the RTT value -//*-------------------------------------------------------------------------------------- -unsigned int AT91F_RTTReadValue(AT91PS_RTTC pRTTC) -{ - register volatile unsigned int val1,val2; - do - { - val1 = pRTTC->RTTC_RTVR; - val2 = pRTTC->RTTC_RTVR; - } - while(val1 != val2); - return(val1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Close -//* \brief Close SPI: disable IT disable transfert, close PDC -//*---------------------------------------------------------------------------- -void AT91F_SPI_Close(AT91PS_SPI pSPI) // \arg pointer to a SPI controller -{ - //* Reset all the Chip Select register - pSPI->SPI_CSR[0] = 0 ; - pSPI->SPI_CSR[1] = 0 ; - pSPI->SPI_CSR[2] = 0 ; - pSPI->SPI_CSR[3] = 0 ; - - //* Reset the SPI mode - pSPI->SPI_MR = 0 ; - - //* Disable all interrupts - pSPI->SPI_IDR = 0xFFFFFFFF ; - - //* Abort the Peripheral Data Transfers - AT91F_PDC_Close((AT91PS_PDC) &(pSPI->SPI_RPR)); - - //* Disable receiver and transmitter and stop any activity immediately - pSPI->SPI_CR = AT91C_SPI_SPIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ADC_CfgTimings -//* \brief Configure the different necessary timings of the ADC controller -//*---------------------------------------------------------------------------- -void AT91F_ADC_CfgTimings ( - AT91PS_ADC pADC, // pointer to a ADC controller - unsigned int mck_clock, // in MHz - unsigned int adc_clock, // in MHz - unsigned int startup_time, // in us - unsigned int sample_and_hold_time) // in ns -{ - unsigned int prescal,startup,shtim; - - prescal = mck_clock/(2*adc_clock) - 1; - startup = adc_clock*startup_time/8 - 1; - shtim = adc_clock*sample_and_hold_time/1000 - 1; - - //* Write to the MR register - pADC->ADC_MR = ( (prescal<<8) & AT91C_ADC_PRESCAL) | ( (startup<<16) & AT91C_ADC_STARTUP) | ( (shtim<<24) & AT91C_ADC_SHTIM); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_SetBaudrate -//* \brief Set the baudrate according to the CPU clock -//*---------------------------------------------------------------------------- -void AT91F_SSC_SetBaudrate ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int mainClock, // \arg peripheral clock - unsigned int speed) // \arg SSC baudrate -{ - unsigned int baud_value; - //* Define the baud rate divisor register - if (speed == 0) - baud_value = 0; - else - { - baud_value = (unsigned int) (mainClock * 10)/(2*speed); - if ((baud_value % 10) >= 5) - baud_value = (baud_value / 10) + 1; - else - baud_value /= 10; - } - - pSSC->SSC_CMR = baud_value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_Configure -//* \brief Configure SSC -//*---------------------------------------------------------------------------- -void AT91F_SSC_Configure ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int syst_clock, // \arg System Clock Frequency - unsigned int baud_rate, // \arg Expected Baud Rate Frequency - unsigned int clock_rx, // \arg Receiver Clock Parameters - unsigned int mode_rx, // \arg mode Register to be programmed - unsigned int clock_tx, // \arg Transmitter Clock Parameters - unsigned int mode_tx) // \arg mode Register to be programmed -{ - //* Disable interrupts - pSSC->SSC_IDR = (unsigned int) -1; - - //* Reset receiver and transmitter - pSSC->SSC_CR = AT91C_SSC_SWRST | AT91C_SSC_RXDIS | AT91C_SSC_TXDIS ; - - //* Define the Clock Mode Register - AT91F_SSC_SetBaudrate(pSSC, syst_clock, baud_rate); - - //* Write the Receive Clock Mode Register - pSSC->SSC_RCMR = clock_rx; - - //* Write the Transmit Clock Mode Register - pSSC->SSC_TCMR = clock_tx; - - //* Write the Receive Frame Mode Register - pSSC->SSC_RFMR = mode_rx; - - //* Write the Transmit Frame Mode Register - pSSC->SSC_TFMR = mode_tx; - - //* Clear Transmit and Receive Counters - AT91F_PDC_Open((AT91PS_PDC) &(pSSC->SSC_RPR)); - - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Configure -//* \brief Configure USART -//*---------------------------------------------------------------------------- -void AT91F_US_Configure ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int mainClock, // \arg peripheral clock - unsigned int mode , // \arg mode Register to be programmed - unsigned int baudRate , // \arg baudrate to be programmed - unsigned int timeguard ) // \arg timeguard to be programmed -{ - //* Disable interrupts - pUSART->US_IDR = (unsigned int) -1; - - //* Reset receiver and transmitter - pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ; - - //* Define the baud rate divisor register - AT91F_US_SetBaudrate(pUSART, mainClock, baudRate); - - //* Write the Timeguard Register - AT91F_US_SetTimeguard(pUSART, timeguard); - - //* Clear Transmit and Receive Counters - AT91F_PDC_Open((AT91PS_PDC) &(pUSART->US_RPR)); - - //* Define the USART mode - pUSART->US_MR = mode ; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Close -//* \brief Close USART: disable IT disable receiver and transmitter, close PDC -//*---------------------------------------------------------------------------- -void AT91F_US_Close(AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset the baud rate divisor register - pUSART->US_BRGR = 0 ; - - //* Reset the USART mode - pUSART->US_MR = 0 ; - - //* Reset the Timeguard Register - pUSART->US_TTGR = 0; - - //* Disable all interrupts - pUSART->US_IDR = 0xFFFFFFFF ; - - //* Abort the Peripheral Data Transfers - AT91F_PDC_Close((AT91PS_PDC) &(pUSART->US_RPR)); - - //* Disable receiver and transmitter and stop any activity immediately - pUSART->US_CR = AT91C_US_TXDIS | AT91C_US_RXDIS | AT91C_US_RSTTX | AT91C_US_RSTRX ; -} - - |