diff options
Diffstat (limited to 'openpcd/firmware/src/picc/ssc_picc.c')
| -rw-r--r-- | openpcd/firmware/src/picc/ssc_picc.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/openpcd/firmware/src/picc/ssc_picc.c b/openpcd/firmware/src/picc/ssc_picc.c new file mode 100644 index 0000000..0cd20cc --- /dev/null +++ b/openpcd/firmware/src/picc/ssc_picc.c @@ -0,0 +1,367 @@ +/* AT91SAM7 SSC controller routines for OpenPCD + * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> + * + * We use SSC for both TX and RX side. + * + * RX side is interconnected with MFOUT of RC632 + * + * TX side is interconnected with MFIN of RC632 + */ + +#include <errno.h> +#include <string.h> +#include <sys/types.h> +#include <AT91SAM7.h> +#include <lib_AT91SAM7.h> +#include <openpcd.h> + +#include "usb_handler.h" +#include "openpcd.h" +#include "dbgu.h" + +/* definitions for four-times oversampling */ +#define REQA 0x10410441 +#define WUPA 0x04041041 + +static const AT91PS_SSC ssc = AT91C_BASE_SSC; +static AT91PS_PDC rx_pdc; + +enum ssc_mode { + SSC_MODE_14443A_SHORT, + SSC_MODE_14443A_STANDARD, + SSC_MODE_14443B, +}; + +struct ssc_state { + struct req_ctx *rx_ctx[2]; + enum ssc_mode mode; +}; +static struct ssc_state ssc_state; + +/* This is for four-times oversampling */ +#define ISO14443A_SOF_SAMPLE 0x08 +#define ISO14443A_SOF_LEN 4 + +static void ssc_rx_mode_set(enum ssc_mode ssc_mode) +{ + u_int8_t data_len, num_data, sync_len; + u_int32_t start_cond; + + /* disable Rx */ + ssc->SSC_CR = AT91C_SSC_RXDIS; + + /* disable all Rx related interrupt sources */ + AT91F_SSC_DisableIt(ssc, ssc->SSC_IDR = AT91C_SSC_RXRDY | + AT91C_SSC_OVRUN | AT91C_SSC_ENDRX | + AT91C_SSC_RXBUFF | AT91C_SSC_RXSYN | + AT91C_SSC_CP0 | AT91C_SSC_CP1); + + switch (ssc_mode) { +#ifdef CONFIG_PICCSIM + case SSC_MODE_14443A_SHORT: + start_cond = AT91C_SSC_START_0; + sync_len = ISO14443A_SOF_LEN; + ssc->SSC_RC0R = ISO14443A_SOF_SAMPLE; + data_len = 32; + num_data = 1; + break; + case SSC_MODE_14443A_STANDARD: + start_cond = AT91C_SSC_START_0; + sync_len = ISO14443A_SOF_LEN; + ssc->SSC_RC0R = ISO14443A_SOF_SAMPLE; + data_len = 1; + num_data = 1; /* FIXME */ + break; + case SSC_MODE_14443B: + /* start sampling at first falling data edge */ + //start_cond = + break; +#endif /* CONFIG_PICCSIM */ + default: + return; + } + ssc->SSC_RFMR = (data_len-1) & 0x1f | + (((num_data-1) & 0x0f) << 8) | + (((sync_len-1) & 0x0f) << 16); + ssc->SSC_RCMR = AT91C_SSC_CKS_RK | AT91C_SSC_CKO_NONE | start_cond; + + /* Enable RX interrupts */ + AT91F_SSC_EnableIt(ssc, AT91C_SSC_OVRUN); + //AT91C_SSC_ENDRX | AT91C_SSC_RXBUFF); + + ssc_state.mode = ssc_mode; + + AT91F_PDC_EnableRx(rx_pdc); +} + +static void ssc_tx_mode_set(enum ssc_mode ssc_mode) +{ + u_int8_t data_len, num_data, sync_len; + u_int32_t start_cond; + + /* disable Tx */ + ssc->SSC_CR = AT91C_SSC_TXDIS; + + /* disable all Tx related interrupt sources */ + ssc->SSC_IDR = AT91C_SSC_TXRDY | AT91C_SSC_TXEMPTY | AT91C_SSC_ENDTX | + AT91C_SSC_TXBUFE | AT91C_SSC_TXSYN; + + switch (ssc_mode) { +#ifdef CONFIG_PICCSIM + case SSC_MODE_14443A_SHORT: + start_cond = AT91C_SSC_START_RISE_RF; + sync_len = ISO14443A_SOF_LEN; + data_len = 32; + num_data = 1; + break; + case SSC_MODE_14443A_STANDARD: + start_cond = AT91C_SSC_START_0; + sync_len = ISO14443A_SOF_LEN; + ssc->SSC_RC0R = ISO14443A_SOF_SAMPLE; + data_len = 1; + num_data = 1; /* FIXME */ + break; +#endif /* CONFIG_PICCSIM */ + } + ssc->SSC_TFMR = (data_len-1) & 0x1f | + (((num_data-1) & 0x0f) << 8) | + (((sync_len-1) & 0x0f) << 16); + ssc->SSC_TCMR = AT91C_SSC_CKS_RK | AT91C_SSC_CKO_NONE | start_cond; + +#if 0 + /* Enable RX interrupts */ + AT91F_SSC_EnableIt(ssc, AT91C_SSC_OVRUN | + AT91C_SSC_ENDRX | AT91C_SSC_RXBUFF); + AT91F_PDC_EnableRx(rx_pdc); + + ssc_state.mode = ssc_mode; +#endif +} + + + + +static struct openpcd_hdr opcd_ssc_hdr = { + .cmd = OPENPCD_CMD_SSC_READ, +}; + +static inline void init_opcdhdr(struct req_ctx *rctx) +{ + memcpy(&rctx->tx.data[0], &opcd_ssc_hdr, sizeof(opcd_ssc_hdr)); + rctx->tx.tot_len = MAX_HDRSIZE + MAX_REQSIZE -1; +} + +#ifdef DEBUG_SSC_REFILL +#define DEBUGR(x, args ...) DEBUGPCRF(x, ## args) +#else +#define DEBUGR(x, args ...) +#endif + +static char dmabuf1[512]; +static char dmabuf2[512]; + +/* Try to refill RX dma descriptors. Return values: + * 0) no dma descriptors empty + * 1) filled next/secondary descriptor + * 2) filled both primary and secondary descriptor + * -1) no free request contexts to use + * -2) only one free request context, but two free descriptors + */ +static int8_t ssc_rx_refill(void) +{ +#if 0 + struct req_ctx *rctx; + + rctx = req_ctx_find_get(RCTX_STATE_FREE, RCTX_STATE_SSC_RX_BUSY); + if (!rctx) { + DEBUGPCRF("no rctx for refill!"); + return -1; + } + init_opcdhdr(rctx); + + if (AT91F_PDC_IsRxEmpty(rx_pdc)) { + DEBUGR("filling primary SSC RX dma ctx"); + AT91F_PDC_SetRx(rx_pdc, &rctx->rx.data[MAX_HDRSIZE], + (sizeof(rctx->rx.data)-MAX_HDRSIZE)>>2); + ssc_state.rx_ctx[0] = rctx; + + /* If primary is empty, secondary must be empty, too */ + rctx = req_ctx_find_get(RCTX_STATE_FREE, + RCTX_STATE_SSC_RX_BUSY); + if (!rctx) { + DEBUGPCRF("no rctx for secondary refill!"); + return -2; + } + init_opcdhdr(rctx); + } + + if (AT91F_PDC_IsNextRxEmpty(rx_pdc)) { + DEBUGR("filling secondary SSC RX dma ctx"); + AT91F_PDC_SetNextRx(rx_pdc, &rctx->rx.data[MAX_HDRSIZE], + (sizeof(rctx->rx.data)-MAX_HDRSIZE)>2); + ssc_state.rx_ctx[1] = rctx; + return 2; + } else { + /* we were unable to fill*/ + DEBUGPCRF("prim/secnd DMA busy, can't refill"); + req_ctx_put(rctx); + return 0; + } +#else + if (AT91F_PDC_IsRxEmpty(rx_pdc)) + AT91F_PDC_SetRx(rx_pdc, dmabuf1, sizeof(dmabuf1)>>2); + + if (AT91F_PDC_IsNextRxEmpty(rx_pdc)) + AT91F_PDC_SetNextRx(rx_pdc, dmabuf2, sizeof(dmabuf2)>>2); + else + DEBUGPCRF("prim/secnd DMA busy, can't refill"); +#endif +} + +#define ISO14443A_FDT_SHORT_1 1236 +#define ISO14443A_FDT_SHORT_0 1172 + +static void ssc_irq(void) +{ + u_int32_t ssc_sr = ssc->SSC_SR; + DEBUGP("ssc_sr=0x%08x: ", ssc_sr); + + if (ssc_sr & AT91C_SSC_OVRUN) + DEBUGP("RX OVERRUN "); + + switch (ssc_state.mode) { +#ifdef CONFIG_PICCSIM + case SSC_MODE_14443A_SHORT: + if (ssc_sr & AT91C_SSC_RXSYN) + DEBUGP("RXSYN "); + if (ssc_sr & AT91C_SSC_RXRDY) { + u_int32_t sample = ssc->SSC_RHR; + DEBUGP("RXRDY=0x%08x ", sample); + /* Try to set FDT compare register ASAP */ + if (sample == REQA) { + tc_fdt_set(ISO14443A_FDT_SHORT_0); + /* FIXME: prepare and configure ATQA response */ + } else if (sample == WUPA) { + tc_fdt_set(ISO14443A_FDT_SHORT_1); + /* FIXME: prepare and configure ATQA response */ + } else + DEBUGP("<== unknown "); + } + break; + + case SSC_MODE_14443A_STANDARD: + + if (ssc_sr & (AT91C_SSC_ENDRX | AT91C_SSC_RXBUFF)) { +#if 0 + /* Mark primary RCTX as ready to send for usb */ + req_ctx_set_state(ssc_state.rx_ctx[0], + RCTX_STATE_UDP_EP2_PENDING); + /* second buffer gets propagated to primary */ + ssc_state.rx_ctx[0] = ssc_state.rx_ctx[1]; + ssc_state.rx_ctx[1] = NULL; +#endif + + if (ssc_sr & AT91C_SSC_RXBUFF) { + DEBUGPCRF("RXBUFF, shouldn't happen!"); +#if 0 + req_ctx_set_state(ssc_state.rx_ctx[0], + RCTX_STATE_UDP_EP2_PENDING); +#endif + } + if (ssc_rx_refill() == -1) + AT91F_AIC_DisableIt(ssc, AT91C_SSC_ENDRX | + AT91C_SSC_RXBUFF | + AT91C_SSC_OVRUN); + } + break; +#endif /* CONFIG_PICCSIM */ + } +} + + +void ssc_rx_unthrottle(void) +{ + AT91F_SSC_EnableIt(ssc, AT91C_SSC_ENDRX | + AT91C_SSC_RXBUFF | AT91C_SSC_OVRUN); +} + +void ssc_rx_start(void) +{ + DEBUGPCRF("starting SSC RX\n"); + + /* Enable Reception */ + AT91F_SSC_EnableRx(ssc); +} + +void ssc_rx_stop(void) +{ + /* Disable reception */ + AT91F_SSC_DisableRx(ssc); +} + +void ssc_tx_init(void) +{ + /* IMPORTANT: Disable PA23 (PWM0) output, since it is connected to + * PA17 !! */ + AT91F_PIO_CfgInput(AT91C_BASE_PIOA, OPENPCD_PIO_MFIN_PWM); + AT91F_PIO_CfgPeriph(AT91C_BASE_PIOA, OPENPCD_PIO_MFIN_SSC_TX | + OPENPCD_PIO_MFOUT_SSC_RX | OPENPCD_PIO_SSP_CKIN, + 0); +} + +static int ssc_usb_in(struct req_ctx *rctx) +{ + struct openpcd_hdr *poh = (struct openpcd_hdr *) &rctx->rx.data[0]; + struct openpcd_hdr *pih = (struct openpcd_hdr *) &rctx->tx.data[0]; + + /* FIXME: implement this */ + switch (poh->cmd) { + case OPENPCD_CMD_SSC_READ: + break; + case OPENPCD_CMD_SSC_WRITE: + break; + } + + req_ctx_put(rctx); + return -EINVAL; +} + +void ssc_rx_init(void) +{ + rx_pdc = (AT91PS_PDC) &(ssc->SSC_RPR); + + AT91F_SSC_CfgPMC(); + AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_SSC, + OPENPCD_IRQ_PRIO_SSC, + AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, &ssc_irq); + AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SSC); + + /* Reset */ + ssc->SSC_CR = AT91C_SSC_SWRST; + + /* don't divide clock */ + ssc->SSC_CMR = 0; + + ssc->SSC_RCMR = AT91C_SSC_CKS_RK | AT91C_SSC_CKO_NONE | + AT91C_SSC_START_CONTINOUS; + /* Data bits per Data N = 32-1, Data words per Frame = 15-1 (=60 byte)*/ + ssc->SSC_RFMR = 31 | AT91C_SSC_MSBF | (14 << 8); + + /* Enable RX interrupts */ + AT91F_SSC_EnableIt(ssc, AT91C_SSC_OVRUN | + AT91C_SSC_ENDRX | AT91C_SSC_RXBUFF); + AT91F_PDC_EnableRx(rx_pdc); + + usb_hdlr_register(&ssc_usb_in, OPENPCD_CMD_CLS_SSC); +} + +void ssc_fini(void) +{ + usb_hdlr_unregister(OPENPCD_CMD_CLS_SSC); + AT91F_PDC_DisableRx(rx_pdc); + AT91F_SSC_DisableTx(ssc); + AT91F_SSC_DisableRx(ssc); + AT91F_SSC_DisableIt(ssc, 0xfff); + AT91F_PMC_DisablePeriphClock(AT91C_BASE_PMC, + ((unsigned int) 1 << AT91C_ID_SSC)); +} |