summaryrefslogtreecommitdiff
path: root/firmware/src
Commit message (Expand)AuthorAgeFilesLines
...
* simtrace: fix problems causing bogus waiting time expirationsHarald Welte2010-11-181-1/+5
* simtrace: Introduce code for proper handling of PTS / PPSHarald Welte2010-11-181-12/+148
* simtrace: add TC based waiting time counter, signal ATR / expiry via USBHarald Welte2010-11-186-80/+292
* simtrace: introduce RST pin handlingHarald Welte2010-11-141-12/+32
* Initial version of a SAM7 USART based ISO7816-3 T=0 snifferHarald Welte2010-11-145-2/+526
* enable USB string descriptorsHarald Welte2010-11-141-1/+1
* disable USB EP0 debuggingHarald Welte2010-11-141-1/+1
* Use smaller number of request contexts on a SAM64Harald Welte2010-11-131-0/+5
* On the Olimex board, the buttons are low-activeHarald Welte2010-11-131-1/+7
* * move usb descriptors into separate file (src/os/usb_descriptors_openpcd.h)laforge2008-02-235-97/+319
* allow GETSTATE and GETSTATUS requests in MANIFEST state (compatibility with d...laforge2008-02-171-3/+19
* fix USB strings: OpenPCD is a RFID Reader, not a simulatorlaforge2008-02-172-2/+2
* add rc632 eeprom write functionlaforge2008-02-081-0/+51
* Add watchdog reset to dfuhenryk2007-11-071-1/+8
* main_presence initial check in - continuous scanning for new tag idmeri2007-04-101-0/+163
* make sure that WDT_DEBUG is undefinedmeri2007-04-101-1/+3
* add power control function definitionmeri2007-04-101-2/+2
* decreased USB debug verbosity to allow full debug code inclusionmeri2007-04-101-4/+4
* deleted unsused filesmeri2007-04-102-75/+0
* added blinking green LED to visualize USB inner loop activity - important to ...meri2007-04-101-1/+12
* added watchdog time support and debouncing on power-cyclemeri2007-04-103-10/+12
* removed ugly CR/LFmeri2007-04-101-25/+25
* added several new USB commands: remote reset, API version and read/write vola...meri2007-04-102-9/+90
* moved flash code to seperate filemeri2007-04-103-2/+75
* introduce constant DA_BASELINE for DAC default valuelaforge2006-12-191-2/+4
* - modify SSC code to again use tc_cdiv_sync for bitclock synchronizationlaforge2006-12-182-36/+43
* - temporarily disable FDT since it's not needed yetlaforge2006-12-181-1/+1
* - iterate over all PIO, not only starting from 27 ?!?laforge2006-12-181-1/+2
* add DAC driver that was missed two commits agolaforge2006-12-182-0/+77
* add void AT91F_DBGU_Fini prototype to header filelaforge2006-12-181-0/+1
* - add new DAC driver (instead of poti) for PICClaforge2006-12-188-29/+110
* add some more debug statementslaforge2006-12-181-5/+6
* add new 'main_mifare' firmware to demonstrate in-reader librfid mifarelaforge2006-11-281-0/+279
* - add svn:ignore property to make 'svn st' output more realisticlaforge2006-10-1532-1983/+858
* - read fifo _length_, not fifo datalaforge2006-10-041-2/+1
* v0.4 of the readers uses a different pin for the USB pulluplaforge2006-10-045-4/+25
* - add read of serial number via usblaforge2006-10-041-2/+7
* add feature to write full register setlaforge2006-10-041-1/+33
* - first working tested version if system_irq demuxlaforge2006-10-045-57/+98
* move udp irq/refill back to flash for nowlaforge2006-10-042-4/+4
* reduce number of large request contexts to four, should be sufficient for nowlaforge2006-10-041-1/+1
* - add function to read RC632 serial number laforge2006-10-031-0/+14
* - we have to respond with a STALL to SET_CONFIGURATIONlaforge2006-10-031-31/+33
* - add proper system interrupt (shared) demultiplexing codelaforge2006-10-017-16/+200
* synchronize bit clock based on software trigger (needed for cdiv_sync)laforge2006-10-011-1/+2
* - add command to read rc632 serial number via USBlaforge2006-10-011-0/+11
* add support for cdiv (sample clock) bit clock synchronizationlaforge2006-10-012-0/+108
* re-define REQ_CTX_STATE_FREE != 0 to detect bugslaforge2006-10-011-1/+1
* initialize req_ctx state as free.laforge2006-10-011-0/+1
* clean up dbgu startup printout laforge2006-10-011-8/+8
personal git repositories of Harald Welte. Your mileage may vary