summaryrefslogtreecommitdiff
path: root/firmware/src
Commit message (Expand)AuthorAgeFilesLines
* change req_ctx sizes large 2048->1000; small 128->270Min Xu2014-11-111-2/+2
* req_ctx: Use consistent numeric range for REQ_CTX_STATEMin Xu2014-11-112-21/+24
* update main_factory to write version 1,4,0 instead of 1,3,0 to OTPHarald Welte2014-11-111-1/+1
* simtrace: main_factory: Program OTP area with simtrace versionHarald Welte2013-11-171-3/+21
* simtrace: Add OTP data containing production dataHarald Welte2013-11-172-0/+112
* spi_flash: add code for OTP read/writeHarald Welte2013-11-172-18/+251
* iso7816_uart: Make sure ATR is separated from normal APDU in all casesHarald Welte2012-05-181-7/+12
* 7816_uart: add comment about f/d calculationHarald Welte2012-05-181-0/+2
* simtrace: introduce statisticsv0.5Harald Welte2012-03-233-2/+58
* wdt: make sure WDT doesn't fire inadvertentlyHarald Welte2012-03-221-6/+13
* simtrace: implement SIM power switching APIHarald Welte2012-03-222-18/+48
* make VCC / card detect more reliableHarald Welte2012-03-221-2/+2
* disable logging of PIO status in PIO interrupt routineHarald Welte2012-03-221-1/+1
* simtrace: Inform host of Fi/Di values (and flag change due to PPS)Harald Welte2012-02-121-0/+5
* simtrace: 7816 UART: Add missing entry in Di tableSylvain Munaut2012-01-261-1/+1
* Make sure we don't forward power _and_ supply SIM power at the same timeKevin Redon2011-12-182-1/+20
* usb: Do not send ZLP when we have filled the windowv0.4Holger Hans Peter Freyther2011-12-143-49/+53
* dfu: Remove unused variable, mark method as not retuningHolger Hans Peter Freyther2011-11-101-3/+1
* dfu: Use {} for possible empty if statement (in case debug is off)Holger Hans Peter Freyther2011-11-101-1/+3
* dfu: Mark unsued variables as __unused for nowHolger Hans Peter Freyther2011-11-101-4/+4
* dfu: udp_ep0_recv_clean is static and is not called anywhereHolger Hans Peter Freyther2011-11-101-14/+0
* dfu: The i variable to disable interrupts shadows the outer indexHolger Hans Peter Freyther2011-11-101-3/+3
* fix linking issue with latest binutils versionsv0.3Bjoern Kerler2011-10-211-1/+1
* Fix fi/di calculation for certain mobiles like GT-S770 or HTC RaphaelBjoern Kerler2011-10-211-3/+3
* SIMTRACE: ISO7816: Deal with ATR that don't have historical bytesv0.2Harald Welte2011-08-161-11/+21
* ISO7816: Properly handle T=0 only cards without TCK in ATRHarald Welte2011-08-161-1/+13
* SIMTRACE UART: Reset error status on error related IRQHarald Welte2011-08-151-0/+9
* simtrace UART: set INACK flag to make sure we ignore any parity errorHarald Welte2011-08-151-3/+3
* DBGU: Print Reset controller Status Register on bootHarald Welte2011-08-151-0/+4
* USB: Add support for the 3rd DFU interface (RAM)Harald Welte2011-08-151-0/+6
* DFU: Fix execution of software that was loaded to RAM via DFUv0.1Harald Welte2011-07-301-8/+17
* DFU: Support re-flashing of DFU via DFUHarald Welte2011-07-301-16/+132
* DFU: add third 'alternate configuration' for RAM loadHarald Welte2011-07-308-10/+36
* simtrace: add some early spi flash utility routinesHarald Welte2011-07-302-0/+224
* add new RUN_FROM_RAM run-mode for direct DFU-to-RAM supportHarald Welte2011-07-302-1/+3
* sam7dfu: update copyright yearsHarald Welte2011-07-291-1/+1
* sam7dfu: make sure we can use USB reset to get from DFU -> APPHarald Welte2011-07-291-2/+14
* USB driver: use the DFU-provided function to send EP0 dataHarald Welte2011-07-071-48/+1
* dfu: fix EP0 IN trasnfers that are even multiple of 8Harald Welte2011-07-071-4/+14
* simtrace: initialize sniffer mode right after start-upHarald Welte2011-06-301-18/+22
* simtrace: switch VCC_SIM into output mode, as we use it to supply VccHarald Welte2011-06-211-2/+8
* simtrace: add VCC_PHINE IRQ detectionHarald Welte2011-06-211-0/+19
* simtrace: use better names for GPIO linesHarald Welte2011-06-211-4/+5
* simtrace: introduce mode sniffer / mitm switchingHarald Welte2011-06-173-8/+58
* simtrace: add support for the analog bus switchHarald Welte2011-06-164-2/+94
* simtrace: add more definitions regarding real hw prototypeHarald Welte2011-06-162-1/+22
* update USB strings (company name and some copy+paste mistakes)Harald Welte2011-06-152-3/+3
* typo: Fix typo, transform reqyests to requests.Holger Hans Peter Freyther2011-01-317-7/+7
* add missing usb_strings_dfu.txt file to simtrace directoryHarald Welte2010-12-091-0/+5
* simtrace: Make sure ATR is sent in its own RCTX and we re-allocate in timeHarald Welte2010-11-211-1/+11
personal git repositories of Harald Welte. Your mileage may vary