summaryrefslogtreecommitdiff
path: root/openpcd/firmware/src/pcd/rc632.c
blob: 5d459555f4ccf47fc4f910add56b1f2c692e3647 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
/* Philips CL RC632 driver (via SPI) for OpenPCD firmware
 * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
 *
 * This is heavily based on the librfid RC632 driver. All primitive access
 * functions such as rc632_{reg,fifo}_{read,write}() are API compatible to
 * librfid in order to be able to leverage higher-level code from librfid
 * to this OpenPCD firmware.
 *
 * */

#include <string.h>
#include <errno.h>
#include <lib_AT91SAM7.h>
#include <cl_rc632.h>
#include <openpcd.h>
#include "../openpcd.h"
#include <os/fifo.h>
#include <os/dbgu.h>
#include <os/pcd_enumerate.h>
#include <os/usb_handler.h>
#include <os/req_ctx.h>
#include "rc632.h"

#define ALWAYS_RESPOND

#define NOTHING  do {} while(0)

#if 0
#define DEBUGPSPI DEBUGP
#define DEBUGPSPIIRQ DEBUGP
#else
#define	DEBUGPSPI(x, args ...)  NOTHING
#define DEBUGPSPIIRQ(x, args...) NOTHING
#endif

#if 0
#define DEBUG632 DEBUGPCRF
#else
#define DEBUG632(x, args ...)	NOTHING
#endif


/* SPI driver */

#ifdef OLIMEX
#define SPI_DEBUG_LOOPBACK
#endif

#define SPI_USES_DMA

#define SPI_MAX_XFER_LEN	65

static const AT91PS_SPI pSPI = AT91C_BASE_SPI;

/* SPI irq handler */
static void spi_irq(void)
{
	u_int32_t status = pSPI->SPI_SR;

	DEBUGPSPIIRQ("spi_irq: 0x%08x ", status);

	if (status & AT91C_SPI_OVRES)
		DEBUGPSPIIRQ("Overrun ");
	if (status & AT91C_SPI_MODF)
		DEBUGPSPIIRQ("ModeFault ");
	if (status & AT91C_SPI_ENDRX) {
		pSPI->SPI_IDR = AT91C_SPI_ENDRX;
		DEBUGPSPIIRQ("ENDRX ");
	}
	if (status & AT91C_SPI_ENDTX) {
		pSPI->SPI_IDR = AT91C_SPI_ENDTX;
		DEBUGPSPIIRQ("ENDTX ");
	}

	DEBUGPSPIIRQ("\r\n");

	AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_SPI);
}

#ifdef SPI_USES_DMA
static int spi_transceive(const u_int8_t *tx_data, u_int16_t tx_len, 
			  u_int8_t *rx_data, u_int16_t *rx_len)
{
	//tx_len = *rx_len = 65;
	DEBUGPSPI("DMA Xfer tx=%s\r\n", hexdump(tx_data, tx_len));
	if (*rx_len < tx_len) {
		DEBUGPCRF("rx_len=%u smaller tx_len=%u\n", *rx_len, tx_len);
		return -1;
	}
	//AT91F_SPI_Disable(pSPI);

	AT91F_SPI_ReceiveFrame(pSPI, rx_data, tx_len, NULL, 0);
	AT91F_SPI_SendFrame(pSPI, tx_data, tx_len, NULL, 0);

	AT91F_PDC_EnableRx(AT91C_BASE_PDC_SPI);
	AT91F_PDC_EnableTx(AT91C_BASE_PDC_SPI);

	pSPI->SPI_IER = AT91C_SPI_ENDTX|AT91C_SPI_ENDRX;
	//pSPI->SPI_IDR = AT91C_SPI_ENDTX|AT91C_SPI_ENDRX;


	while (! (pSPI->SPI_SR & AT91C_SPI_ENDRX)) ;

	DEBUGPSPI("DMA Xfer finished rx=%s\r\n", hexdump(rx_data, tx_len));

	*rx_len = tx_len;

	return 0;
}
#else
/* stupid polling transceiver routine */
static int spi_transceive(const u_int8_t *tx_data, u_int16_t tx_len, 
		   u_int8_t *rx_data, u_int16_t *rx_len)
{
	u_int16_t tx_cur = 0;
	u_int16_t rx_len_max = 0;
	u_int16_t rx_cnt = 0;

	/* disable RC632 interrupt because it wants to do SPI transactions */
	AT91F_AIC_DisableIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632);

	DEBUGPSPI("spi_transceive: enter(tx_len=%u) ", tx_len);

	if (rx_len) {
		rx_len_max = *rx_len;
		*rx_len = 0;
	}

	//AT91F_SPI_Enable(pSPI);
	while (1) { 
		u_int32_t sr = pSPI->SPI_SR;
		u_int8_t tmp;
		if (sr & AT91C_SPI_RDRF) {
			tmp = pSPI->SPI_RDR;
			rx_cnt++;
			if (rx_len && *rx_len < rx_len_max)
				rx_data[(*rx_len)++] = tmp;
		}
	 	if (sr & AT91C_SPI_TDRE) {
			if (tx_len > tx_cur)
				pSPI->SPI_TDR = tx_data[tx_cur++];
		}
		if (tx_cur >= tx_len && rx_cnt >= tx_len)
			break;
	}
	//AT91F_SPI_Disable(pSPI);
	if (rx_data)
		DEBUGPSPI("leave(%02x %02x)\r\n", rx_data[0], rx_data[1]);
	else
		DEBUGPSPI("leave()\r\n");

	/* Re-enable RC632 interrupts */
	AT91F_AIC_EnableIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632);

	return 0;
}
#endif

/* RC632 driver */

/* static buffers used by RC632 access primitives below. 
 * Since we only have one */

static u_int8_t spi_outbuf[SPI_MAX_XFER_LEN];
static u_int8_t spi_inbuf[SPI_MAX_XFER_LEN];

#define FIFO_ADDR (RC632_REG_FIFO_DATA << 1)

struct rc632 {
	u_int16_t flags;
	struct fifo fifo;
};
#define RC632_F_FIFO_TX		0x0001
static struct rc632 rc632;

/* RC632 access primitives */

int rc632_reg_write(struct rfid_asic_handle *hdl,
		    u_int8_t addr, u_int8_t data)
{
	u_int16_t rx_len = 2;

	DEBUG632("[0x%02x] <= 0x%02x", addr, data);

	addr = (addr << 1) & 0x7e;

	spi_outbuf[0] = addr;
	spi_outbuf[1] = data;

	//spi_transceive(spi_outbuf, 2, NULL, NULL);
	return spi_transceive(spi_outbuf, 2, spi_inbuf, &rx_len);
}

int rc632_fifo_write(struct rfid_asic_handle *hdl,
		     u_int8_t len, u_int8_t *data, u_int8_t flags)
{
	if (len > sizeof(spi_outbuf)-1)
		len = sizeof(spi_outbuf)-1;

	spi_outbuf[0] = FIFO_ADDR;
	memcpy(&spi_outbuf[1], data, len);

	DEBUG632("[FIFO] <= %s", hexdump(data, len));

	return spi_transceive(spi_outbuf, len+1, NULL, NULL);
}

int rc632_reg_read(struct rfid_asic_handle *hdl, 
		   u_int8_t addr, u_int8_t *val)
{
	u_int16_t rx_len = 2;

	addr = (addr << 1) & 0x7e;

	spi_outbuf[0] = addr | 0x80;
	spi_outbuf[1] = 0x00;

	spi_transceive(spi_outbuf, 2, spi_inbuf, &rx_len);
	*val = spi_inbuf[1];

	DEBUG632("[0x%02x] => 0x%02x", addr>>1, *val);

	return 0;
}

int rc632_fifo_read(struct rfid_asic_handle *hdl,
		    u_int8_t max_len, u_int8_t *data)
{
	int ret;
	u_int8_t fifo_length;
	u_int8_t i;
	u_int16_t rx_len;

 	ret = rc632_reg_read(hdl, RC632_REG_FIFO_LENGTH, &fifo_length);
	if (ret < 0)
		return ret;

	rx_len = fifo_length+1;

	if (max_len < fifo_length)
		fifo_length = max_len;

	for (i = 0; i < fifo_length; i++)
		spi_outbuf[i] = FIFO_ADDR;

	spi_outbuf[0] |= 0x80;
	spi_outbuf[fifo_length] = 0x00;

	spi_transceive(spi_outbuf, fifo_length+1, spi_inbuf, &rx_len);
	memcpy(data, spi_inbuf+1, rx_len-1);

	DEBUG632("[FIFO] => %s", hexdump(data, rx_len-1));

	return 0;
}

int rc632_set_bits(struct rfid_asic_handle *hdl,
		   u_int8_t reg, u_int8_t bits)
{
	u_int8_t val;
	int ret;
	
	ret = rc632_reg_read(hdl, reg, &val);
	if (ret < 0)
		return ret;

	val |= bits;

	return rc632_reg_write(hdl, reg, val);
}

int rc632_clear_bits(struct rfid_asic_handle *hdl,
		     u_int8_t reg, u_int8_t bits)
{
	u_int8_t val;
	int ret;
	
	ret = rc632_reg_read(hdl, reg, &val);
	if (ret < 0)
		return ret;

	val &= ~bits;

	return rc632_reg_write(hdl, reg, val);
}

/* RC632 interrupt handling */

static void rc632_irq(void)
{
	struct req_ctx *irq_rctx;
	struct openpcd_hdr *irq_opcdh;
	u_int8_t cause;

	/* CL RC632 has interrupted us */
	rc632_reg_read(RAH, RC632_REG_INTERRUPT_RQ, &cause);

	/* ACK all interrupts */
	//rc632_reg_write(RAH, RC632_REG_INTERRUPT_RQ, cause);
	rc632_reg_write(RAH, RC632_REG_INTERRUPT_RQ, RC632_INT_TIMER);
	DEBUGP("rc632_irq: ");

	if (cause & RC632_INT_LOALERT) {
		/* FIFO is getting low, refill from virtual FIFO */
		DEBUGP("FIFO_low ");
		#if 0
		if (!fifo_available(&rc632.fifo))
			return;
		#endif
		/* FIXME */
	}
	if (cause & RC632_INT_HIALERT) {
		/* FIFO is getting full, empty into virtual FIFO */
		DEBUGP("FIFO_high ");
		/* FIXME */
	}
	/* All interrupts below can be reported directly to the host */
	if (cause & RC632_INT_TIMER)
		DEBUGP("Timer ");
	if (cause & RC632_INT_IDLE)
		DEBUGP("Idle ");
	if (cause & RC632_INT_RX)
		DEBUGP("RxComplete ");
	if (cause & RC632_INT_TX)
		DEBUGP("TxComplete ");
	

	irq_rctx = req_ctx_find_get(RCTX_STATE_FREE,
				    RCTX_STATE_RC632IRQ_BUSY);
	if (!irq_rctx) {
		DEBUGPCRF("NO RCTX!\n");
		/* disable rc632 interrupt until RCTX is free */
		AT91F_AIC_DisableIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632);
		return;
	}

	irq_opcdh = (struct openpcd_hdr *) &irq_rctx->tx.data[0];

	/* initialize static part of openpcd_hdr for USB IRQ reporting */
	irq_opcdh->cmd = OPENPCD_CMD_IRQ;
	irq_opcdh->flags = 0x00;
	irq_opcdh->reg = 0x07;
	irq_opcdh->val = cause;
	
	req_ctx_set_state(irq_rctx, RCTX_STATE_UDP_EP3_PENDING);
	DEBUGPCR("");
}

void rc632_unthrottle(void)
{
	AT91F_AIC_EnableIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632);
}

void rc632_power(u_int8_t up)
{
        DEBUGPCRF("powering %s RC632", up ? "up" : "down");
	if (up)
		AT91F_PIO_ClearOutput(AT91C_BASE_PIOA,
				      OPENPCD_PIO_RC632_RESET);
	else
		AT91F_PIO_SetOutput(AT91C_BASE_PIOA,
				    OPENPCD_PIO_RC632_RESET);
}

void rc632_reset(void)
{
	volatile int i;

	rc632_power(0);
	for (i = 0; i < 0xffff; i++)
		{}
	rc632_power(1);

	/* wait for startup phase to finish */
	while (1) {
		u_int8_t val;
		rc632_reg_read(RAH, RC632_REG_COMMAND, &val);
		if (val == 0x00)
			break;
	}

	/* turn off register paging */
	rc632_reg_write(RAH, RC632_REG_PAGE0, 0x00);
}

static int rc632_usb_in(struct req_ctx *rctx)
{
	struct openpcd_hdr *poh = (struct openpcd_hdr *) &rctx->rx.data[0];
	struct openpcd_hdr *pih = (struct openpcd_hdr *) &rctx->tx.data[0];
	u_int16_t len = rctx->rx.tot_len-sizeof(*poh);

	switch (poh->cmd) {
	case OPENPCD_CMD_READ_REG:
		rc632_reg_read(RAH, poh->reg, &pih->val);
		DEBUGP("READ REG(0x%02x)=0x%02x ", poh->reg, pih->val);
		goto respond;
		break;
	case OPENPCD_CMD_READ_FIFO:
		{
		u_int16_t req_len = poh->val, remain_len = req_len, pih_len;
		if (req_len > MAX_PAYLOAD_LEN) {
			pih_len = MAX_PAYLOAD_LEN;
			remain_len -= pih_len;
			rc632_fifo_read(RAH, pih_len, pih->data);
			rctx->tx.tot_len += pih_len;
			DEBUGP("READ FIFO(len=%u)=%s ", req_len,
				hexdump(pih->data, pih_len));
			req_ctx_set_state(rctx, RCTX_STATE_UDP_EP2_PENDING);
			udp_refill_ep(2, rctx);

			/* get and initialize second rctx */
			rctx = req_ctx_find_get(RCTX_STATE_FREE,
						RCTX_STATE_MAIN_PROCESSING);
			if (!rctx) {
				DEBUGPCRF("FATAL_NO_RCTX!!!\n");
				break;
			}
			poh = (struct openpcd_hdr *) &rctx->rx.data[0];
			pih = (struct openpcd_hdr *) &rctx->tx.data[0];
			memcpy(pih, poh, sizeof(*poh));
			rctx->tx.tot_len = sizeof(*poh);

			pih_len = remain_len;
			rc632_fifo_read(RAH, pih->val, pih->data);
			rctx->tx.tot_len += pih_len;
			DEBUGP("READ FIFO(len=%u)=%s ", pih_len,
				hexdump(pih->data, pih_len));
			/* don't set state of second rctx, main function
			 * body will do this after switch statement */
		} else {
			pih->val = poh->val;
			rc632_fifo_read(RAH, poh->val, pih->data);
			rctx->tx.tot_len += pih_len;
			DEBUGP("READ FIFO(len=%u)=%s ", poh->val,
				hexdump(pih->data, poh->val));
		}
		goto respond;
		break;
		}
	case OPENPCD_CMD_WRITE_REG:
		DEBUGP("WRITE_REG(0x%02x, 0x%02x) ", poh->reg, poh->val);
		rc632_reg_write(RAH, poh->reg, poh->val);
		break;
	case OPENPCD_CMD_WRITE_FIFO:
		DEBUGP("WRITE FIFO(len=%u): %s ", len,
			hexdump(poh->data, len));
		rc632_fifo_write(RAH, len, poh->data, 0);
		break;
	case OPENPCD_CMD_READ_VFIFO:
		DEBUGP("READ VFIFO ");
		DEBUGP("NOT IMPLEMENTED YET ");
		goto respond;
		break;
	case OPENPCD_CMD_WRITE_VFIFO:
		DEBUGP("WRITE VFIFO ");
		DEBUGP("NOT IMPLEMENTED YET ");
		break;
	case OPENPCD_CMD_REG_BITS_CLEAR:
		DEBUGP("CLEAR BITS ");
		pih->val = rc632_clear_bits(RAH, poh->reg, poh->val);
		break;
	case OPENPCD_CMD_REG_BITS_SET:
		DEBUGP("SET BITS ");
		pih->val = rc632_set_bits(RAH, poh->reg, poh->val);
		break;
	case OPENPCD_CMD_DUMP_REGS:
		DEBUGP("DUMP REGS ");
		DEBUGP("NOT IMPLEMENTED YET ");
		goto respond;
		break;
	default:
		DEBUGP("UNKNOWN ");
		return -EINVAL;
	}

#ifdef ALWAYS_RESPOND
	goto respond;
#endif

	req_ctx_put(rctx);
	DEBUGPCR("");
	return 0;

respond:
	req_ctx_set_state(rctx, RCTX_STATE_UDP_EP2_PENDING);
	/* FIXME: we could try to send this immediately */
	udp_refill_ep(2, rctx);
	DEBUGPCR("");

	return 1;
}

void rc632_init(void)
{
	//fifo_init(&rc632.fifo, 256, NULL, &rc632);

	DEBUGPCRF("entering");

	AT91F_SPI_CfgPMC();

	AT91F_PIO_CfgPeriph(AT91C_BASE_PIOA,
				AT91C_PA11_NPCS0|AT91C_PA12_MISO|
				AT91C_PA13_MOSI |AT91C_PA14_SPCK, 0);

	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_SPI,
			      OPENPCD_IRQ_PRIO_SPI,
			      AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, &spi_irq);
	AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SPI);

	AT91F_SPI_EnableIt(pSPI, AT91C_SPI_MODF|AT91C_SPI_OVRES);
#ifdef SPI_USES_DMA
	AT91F_SPI_EnableIt(pSPI, AT91C_SPI_ENDRX|AT91C_SPI_ENDTX);
#endif

#ifdef SPI_DEBUG_LOOPBACK
	AT91F_SPI_CfgMode(pSPI, AT91C_SPI_MSTR|AT91C_SPI_PS_FIXED|
				AT91C_SPI_MODFDIS|AT91C_SPI_LLB);
#else
	AT91F_SPI_CfgMode(pSPI, AT91C_SPI_MSTR|AT91C_SPI_PS_FIXED|
				AT91C_SPI_MODFDIS);
#endif
	/* CPOL = 0, NCPHA = 1, CSAAT = 0, BITS = 0000, SCBR = 10 (4.8MHz), 
	 * DLYBS = 0, DLYBCT = 0 */
#ifdef SPI_USES_DMA
	AT91F_SPI_CfgCs(pSPI, 0, AT91C_SPI_BITS_8|AT91C_SPI_NCPHA|(10<<8));
#else
	/* 320 kHz in case of I/O based SPI */
	AT91F_SPI_CfgCs(pSPI, 0, AT91C_SPI_BITS_8|AT91C_SPI_NCPHA|(0x7f<<8));
#endif
	AT91F_SPI_Enable(pSPI);

	/* Register rc632_irq */
	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632,
			      OPENPCD_IRQ_PRIO_RC632,
			      AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, &rc632_irq);
	AT91F_AIC_EnableIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632);

	AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_PIO_RC632_RESET);

	rc632_reset();

	/* configure IRQ pin */
	rc632_reg_write(RAH, RC632_REG_IRQ_PIN_CONFIG,
			RC632_IRQCFG_CMOS|RC632_IRQCFG_INV);
	/* enable interrupts */
	rc632_reg_write(RAH, RC632_REG_INTERRUPT_EN, RC632_INT_TIMER);
	
	/* configure AUX to test signal four */
	rc632_reg_write(RAH, RC632_REG_TEST_ANA_SELECT, 0x04);

	usb_hdlr_register(&rc632_usb_in, OPENPCD_CMD_CLS_RC632);
};

#if 0
void rc632_exit(void)
{
	usb_hdlr_unregister(OPENPCD_CMD_CLS_RC632);
	AT91F_AIC_DisableIt(AT91C_BASE_AIC, OPENPCD_IRQ_RC632);
	AT91F_AIC_DisableIt(AT91C_BASE_AIC, AT91C_ID_SPI);
	AT91F_SPI_Disable(pSPI);
}
#endif

#ifdef DEBUG
static int rc632_reg_write_verify(struct rfid_asic_handle *hdl,
				  u_int8_t reg, u_int8_t val)
{
	u_int8_t tmp;

	rc632_reg_write(hdl, reg, val);
	rc632_reg_read(hdl, reg, &tmp);

	DEBUGPCRF("reg=0x%02x, write=0x%02x, read=0x%02x ", reg, val, tmp);

	return (val == tmp);
}

int rc632_dump(void)
{
	u_int8_t i;
	u_int16_t rx_len = sizeof(spi_inbuf);

	for (i = 0; i <= 0x3f; i++) {
		u_int8_t reg = i;
		if (reg == RC632_REG_FIFO_DATA)
			reg = 0x3e;
			
		spi_outbuf[i] = reg << 1;
		spi_inbuf[i] = 0x00;
	}

	/* MSB of first byte of read spi transfer is high */
	spi_outbuf[0] |= 0x80;

	/* last byte of read spi transfer is 0x00 */
	spi_outbuf[0x40] = 0x00;
	spi_inbuf[0x40] = 0x00;

	spi_transceive(spi_outbuf, 0x41, spi_inbuf, &rx_len);

	for (i = 0; i < 0x3f; i++) {
		if (i == RC632_REG_FIFO_DATA)
			DEBUGPCR("REG 0x02 = NOT READ");
		else
			DEBUGPCR("REG 0x%02x = 0x%02x", i, spi_inbuf[i+1]);
	}
	
	return 0;
}

int rc632_test(struct rfid_asic_handle *hdl)
{
	if (rc632_reg_write_verify(hdl, RC632_REG_RX_WAIT, 0x55) != 1)
		return -1;

	if (rc632_reg_write_verify(hdl, RC632_REG_RX_WAIT, 0xAA) != 1)
		return -1;

	return 0;
}
#else /* DEBUG */
int rc632_test(struct rfid_asic_handle *hdl) {}
int rc632_dump(void) {}
#endif /* DEBUG */
personal git repositories of Harald Welte. Your mileage may vary