summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--usb-benchmark-project/Makefile211
-rw-r--r--usb-benchmark-project/benchm_drv.c51
-rw-r--r--usb-benchmark-project/benchm_drv.h5
-rw-r--r--usb-benchmark-project/bin/.empty_dir0
-rw-r--r--usb-benchmark-project/main.c559
-rw-r--r--usb-benchmark-project/obj/.empty_dir0
-rw-r--r--usb-benchmark-project/usb_desc.c289
7 files changed, 1115 insertions, 0 deletions
diff --git a/usb-benchmark-project/Makefile b/usb-benchmark-project/Makefile
new file mode 100644
index 0000000..2957b7e
--- /dev/null
+++ b/usb-benchmark-project/Makefile
@@ -0,0 +1,211 @@
+# ----------------------------------------------------------------------------
+# ATMEL Microcontroller Software Support
+# ----------------------------------------------------------------------------
+# Copyright (c) 2008, Atmel Corporation
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# - Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the disclaimer below.
+#
+# Atmel's name may not be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# ----------------------------------------------------------------------------
+
+# Makefile for compiling the usb-device-core-project project
+
+#-------------------------------------------------------------------------------
+# User-modifiable options
+#-------------------------------------------------------------------------------
+
+# Chip & board used for compilation
+# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
+CHIP = at91sam3u4
+BOARD = at91sam3u-ek
+
+# Trace level used for compilation
+# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
+# TRACE_LEVEL_DEBUG 5
+# TRACE_LEVEL_INFO 4
+# TRACE_LEVEL_WARNING 3
+# TRACE_LEVEL_ERROR 2
+# TRACE_LEVEL_FATAL 1
+# TRACE_LEVEL_NO_TRACE 0
+TRACE_LEVEL = 4
+
+# Optimization level, put in comment for debugging
+OPTIMIZATION = -Os
+
+# AT91 library directory
+AT91LIB = ../../at91lib
+
+# External library
+EXT_LIBS= ../external_libs
+
+# Output file basename
+OUTPUT = usb-benchmark-project-$(BOARD)-$(CHIP)
+
+# Compile with chip specific features
+include $(AT91LIB)/boards/$(BOARD)/$(CHIP)/chip.mak
+
+# Compile for all memories available on the board (this sets $(MEMORIES))
+include $(AT91LIB)/boards/$(BOARD)/board.mak
+
+# Output directories
+BIN = bin
+OBJ = obj
+
+#-------------------------------------------------------------------------------
+# Tools
+#-------------------------------------------------------------------------------
+
+# Tool suffix when cross-compiling
+CROSS_COMPILE = arm-none-eabi-
+
+# Compilation tools
+CC = $(CROSS_COMPILE)gcc
+SIZE = $(CROSS_COMPILE)size
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+
+# Flags
+INCLUDES += -I$(AT91LIB)/boards/$(BOARD)
+INCLUDES += -I$(AT91LIB)/peripherals
+INCLUDES += -I$(AT91LIB)/components
+INCLUDES += -I$(AT91LIB)
+INCLUDES += -I$(EXT_LIBS)
+INCLUDES += -I$(EXT_LIBS)/cmsis
+
+ifeq ($(CHIP_CORE), cortexm3)
+TARGET_OPTS = -mcpu=cortex-m3 -mthumb
+else
+TARGET_OPTS =
+endif
+
+CFLAGS += $(TARGET_OPTS)
+CFLAGS += -Wall -mlong-calls -ffunction-sections
+CFLAGS += -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL)
+ASFLAGS = $(TARGET_OPTS) -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
+LDFLAGS = -g $(OPTIMIZATION) -nostartfiles $(TARGET_OPTS) -Wl,--gc-sections
+
+#-------------------------------------------------------------------------------
+# Files
+#-------------------------------------------------------------------------------
+
+# Directories where source files can be found
+PERIPH = $(AT91LIB)/peripherals
+BOARDS = $(AT91LIB)/boards
+USB = $(AT91LIB)/usb
+UTILITY = $(AT91LIB)/utility
+
+VPATH += $(USB)/device/core
+VPATH += $(USB)/common/core
+VPATH += $(PERIPH)/dbgu
+VPATH += $(PERIPH)/pio
+VPATH += $(PERIPH)/irq
+VPATH += $(PERIPH)/pmc
+VPATH += $(PERIPH)/cp15
+VPATH += $(UTILITY)
+VPATH += $(BOARDS)/$(BOARD)
+VPATH += $(BOARDS)/$(BOARD)/$(CHIP)
+VPATH += $(EXT_LIBS)/cmsis
+
+# Objects built from C source files
+C_OBJECTS += usb_desc.o main.o benchm_drv.o
+#C_OBJECTS += USBD_UDP.o
+C_OBJECTS += USBD_UDPHS.o
+C_OBJECTS += USBDDriver.o
+C_OBJECTS += USBDCallbacks_Initialized.o
+C_OBJECTS += USBDCallbacks_Reset.o
+#C_OBJECTS += USBDCallbacks_Resumed.o
+#C_OBJECTS += USBDCallbacks_Suspended.o
+C_OBJECTS += USBDDriverCb_CfgChanged.o
+C_OBJECTS += USBDDriverCb_IfSettingChanged.o
+C_OBJECTS += USBInterfaceRequest.o
+C_OBJECTS += USBFeatureRequest.o
+C_OBJECTS += USBGenericRequest.o
+C_OBJECTS += USBGetDescriptorRequest.o
+C_OBJECTS += USBSetAddressRequest.o
+C_OBJECTS += USBSetConfigurationRequest.o
+C_OBJECTS += USBGenericDescriptor.o
+C_OBJECTS += USBConfigurationDescriptor.o
+C_OBJECTS += USBEndpointDescriptor.o
+C_OBJECTS += dbgu.o
+C_OBJECTS += pio.o
+C_OBJECTS += pio_it.o
+C_OBJECTS += pmc.o
+C_OBJECTS += led.o
+C_OBJECTS += string.o
+C_OBJECTS += stdio.o
+C_OBJECTS += trace.o
+C_OBJECTS += board_memories.o
+C_OBJECTS += board_lowlevel.o
+
+# Objects for different chips
+ifeq ($(CHIP_CORE), cortexm3)
+C_OBJECTS += nvic.o
+C_OBJECTS += exceptions.o
+C_OBJECTS += board_cstartup_gnu.o
+C_OBJECTS += core_cm3.o
+else
+C_OBJECTS += aic.o
+C_OBJECTS += cp15.o
+endif
+
+# Objects built from Assembly source files
+ifneq ($(CHIP_CORE), cortexm3)
+ASM_OBJECTS += board_cstartup.o
+ASM_OBJECTS += cp15_asm.o
+endif
+
+# Append OBJ and BIN directories to output filename
+OUTPUT := $(BIN)/$(OUTPUT)
+
+#-------------------------------------------------------------------------------
+# Rules
+#-------------------------------------------------------------------------------
+
+all: $(BIN) $(OBJ) $(MEMORIES)
+
+$(BIN) $(OBJ):
+ mkdir $@
+
+define RULES
+C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
+ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
+
+$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
+ $(CC) $(LDFLAGS) -T"$(AT91LIB)/boards/$(BOARD)/$(CHIP)/$$@.lds" -o $(OUTPUT)-$$@.elf $$^
+ $(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
+ $(SIZE) $$^ $(OUTPUT)-$$@.elf
+
+$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
+ $(CC) $(CFLAGS) -D$(1) -c -o $$@ $$<
+
+$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
+ $(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<
+
+debug_$(1): $(1)
+ perl ../resources/gdb/debug.pl $(OUTPUT)-$(1).elf
+
+endef
+
+$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
+
+clean:
+ -rm -f $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf
+
diff --git a/usb-benchmark-project/benchm_drv.c b/usb-benchmark-project/benchm_drv.c
new file mode 100644
index 0000000..c6295f0
--- /dev/null
+++ b/usb-benchmark-project/benchm_drv.c
@@ -0,0 +1,51 @@
+#include <stdlib.h>
+#include <stdint.h>
+#include <board.h>
+#include <utility/trace.h>
+
+#include <usb/common/core/USBGenericRequest.h>
+#include <usb/device/core/USBD.h>
+#include <usb/device/core/USBDDriver.h>
+#include <usb/device/core/USBDDriverDescriptors.h>
+#include <usb/device/core/USBDCallbacks.h>
+
+
+extern const USBDDriverDescriptors usb_perf_driver_desc;
+
+static unsigned char driver_interfaces[3];
+static USBDDriver benchm_driver;
+
+
+/* call-back for control EP requests from the host */
+void USBDCallbacks_RequestReceived(const USBGenericRequest *req)
+{
+ /* forward all (other) requests to core */
+ USBDDriver_RequestHandler(&benchm_driver, req);
+}
+
+void benchmark_drv_init(void)
+{
+ USBDDriver_Initialize(&benchm_driver, &usb_perf_driver_desc,
+ driver_interfaces);
+ USBD_Init();
+}
+
+const uint8_t test_data[2048];
+
+static void wr_compl_cb(void *arg, unsigned char status, unsigned int transferred, unsigned int remain)
+{
+ uint8_t epnr = arg;
+
+ /* re-start */
+ if (status == 0 && remain == 0) {
+ //printf(".");
+ benchmark_start(epnr);
+ } else
+ printf("Err: EP%u wr_compl, status 0x%02u, xfr %u, remain %u\r\n",
+ epnr, status, transferred, remain);
+}
+
+void benchmark_start(uint8_t epnr)
+{
+ USBD_Write(epnr, &test_data, sizeof(test_data), wr_compl_cb, epnr);
+}
diff --git a/usb-benchmark-project/benchm_drv.h b/usb-benchmark-project/benchm_drv.h
new file mode 100644
index 0000000..3df3fa3
--- /dev/null
+++ b/usb-benchmark-project/benchm_drv.h
@@ -0,0 +1,5 @@
+#include <stdint.h>
+
+extern void benchmark_drv_init(void);
+
+void benchmark_start(uint8_t epnr);
diff --git a/usb-benchmark-project/bin/.empty_dir b/usb-benchmark-project/bin/.empty_dir
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/usb-benchmark-project/bin/.empty_dir
diff --git a/usb-benchmark-project/main.c b/usb-benchmark-project/main.c
new file mode 100644
index 0000000..45e6c2b
--- /dev/null
+++ b/usb-benchmark-project/main.c
@@ -0,0 +1,559 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//-----------------------------------------------------------------------------
+/// \dir "USB Enumeration project"
+///
+/// !!!Purpose
+///
+/// The USB Enumeration Project will help you to get familiar with the
+/// USB Device Port(UDP)interface on AT91SAM microcontrollers. Also
+/// it can help you to be familiar with the USB Framework that is used for
+/// rapid development of USB-compliant class drivers such as USB Communication
+/// Device class (CDC).
+///
+/// You can find following information depends on your needs:
+/// - Sample usage of USB Device Framework.
+/// - USB enumerate sequence, the standard and class-specific descriptors and
+/// requests handling.
+/// - The initialize sequence and usage of UDP interface.
+///
+/// !See
+/// - pio: Pin configurations and peripheral configure.
+/// - usb: USB Device Framework and UDP interface driver
+/// - "AT91 USB device framework"
+/// - "USBD API"
+/// - "USB Device Enumeration"
+///
+/// !!!Requirements
+///
+/// This package can be used with all Atmel evaluation kits that have UDP
+/// interface.
+///
+/// The current supported board list:
+/// - at91sam7s-ek (exclude at91sam7s32)
+/// - at91sam7x-ek
+/// - at91sam7xc-ek
+/// - at91sam7a3-ek
+/// - at91sam7se-ek
+/// - at91sam9260-ek
+/// - at91sam9263-ek
+///
+/// !!!Description
+///
+/// When an EK running this program connected to a host (PC for example), with
+/// USB cable, host will notice the attachment of a USB %device. No %device
+/// driver offered for the %device now.
+///
+/// !!!Usage
+///
+/// -# Build the program and download it inside the evaluation board. Please
+/// refer to the
+/// <a href="http://www.atmel.com/dyn/resources/prod_documents/doc6224.pdf">
+/// SAM-BA User Guide</a>, the
+/// <a href="http://www.atmel.com/dyn/resources/prod_documents/doc6310.pdf">
+/// GNU-Based Software Development</a> application note or to the
+/// <a href="ftp://ftp.iar.se/WWWfiles/arm/Guides/EWARM_UserGuide.ENU.pdf">
+/// IAR EWARM User Guide</a>, depending on your chosen solution.
+/// -# On the computer, open and configure a terminal application
+/// (e.g. HyperTerminal on Microsoft Windows) with these settings:
+/// - 115200 bauds
+/// - 8 bits of data
+/// - No parity
+/// - 1 stop bit
+/// - No flow control
+/// -# Start the application.
+/// -# In the terminal window, the following text should appear:
+/// \code
+/// -- USB Device Core Project xxx --
+/// -- AT91xxxxxx-xx
+/// -- Compiled: xxx xx xxxx xx:xx:xx --
+/// \endcode
+/// -# When connecting USB cable to windows, the LED blinks, and the host
+/// reports a new USB %device attachment.
+///
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+/// \unit
+///
+/// !Purpose
+///
+/// This file contains all the specific code for the
+/// usb-device-core-project
+///
+/// !Contents
+///
+/// The code can be roughly broken down as follows:
+/// - Configuration functions
+/// - VBus_Configure
+/// - PIO configurations in start of main
+/// - Interrupt handlers
+/// - ISR_Vbus
+/// - Callback functions
+/// - USBDCallbacks_RequestReceived
+/// - The main function, which implements the program behavior
+///
+/// Please refer to the list of functions in the #Overview# tab of this unit
+/// for more detailed information.
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include <board.h>
+#include <utility/trace.h>
+#include <utility/led.h>
+#include <pio/pio.h>
+#include <pio/pio_it.h>
+#include <usb/common/core/USBGenericDescriptor.h>
+#include <usb/common/core/USBDeviceDescriptor.h>
+#include <usb/common/core/USBConfigurationDescriptor.h>
+#include <usb/common/core/USBInterfaceDescriptor.h>
+#include <usb/common/core/USBGenericRequest.h>
+#include <usb/device/core/USBD.h>
+#include <usb/device/core/USBDDriver.h>
+#include <usb/device/core/USBDDriverDescriptors.h>
+#include <usb/device/core/USBDCallbacks.h>
+#include <pmc/pmc.h>
+
+#include "benchm_drv.h"
+
+//------------------------------------------------------------------------------
+// Definitions
+//------------------------------------------------------------------------------
+/// Use for power management
+#define STATE_IDLE 0
+/// The USB device is in suspend state
+#define STATE_SUSPEND 4
+/// The USB device is in resume state
+#define STATE_RESUME 5
+
+//------------------------------------------------------------------------------
+// Internal variables
+//------------------------------------------------------------------------------
+/// State of USB, for suspend and resume
+unsigned char USBState = STATE_IDLE;
+
+//------------------------------------------------------------------------------
+// Local types
+//------------------------------------------------------------------------------
+/// Configuration descriptors with one interface.
+struct SimpleConfigurationDescriptors {
+
+ USBConfigurationDescriptor configuration;
+ USBInterfaceDescriptor interface;
+};
+
+//------------------------------------------------------------------------------
+// Local variables
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// VBus monitoring (optional)
+//------------------------------------------------------------------------------
+#if defined(PIN_USB_VBUS)
+
+#define VBUS_CONFIGURE() VBus_Configure()
+
+/// VBus pin instance.
+static const Pin pinVbus = PIN_USB_VBUS;
+
+//------------------------------------------------------------------------------
+/// Handles interrupts coming from PIO controllers.
+//------------------------------------------------------------------------------
+static void ISR_Vbus(const Pin *pPin)
+{
+ // Check current level on VBus
+ if (PIO_Get(&pinVbus)) {
+
+ TRACE_INFO("VBUS conn\n\r");
+ USBD_Connect();
+ }
+ else {
+
+ TRACE_INFO("VBUS discon\n\r");
+ USBD_Disconnect();
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the VBus pin to trigger an interrupt when the level on that pin
+/// changes.
+//------------------------------------------------------------------------------
+static void VBus_Configure( void )
+{
+ TRACE_INFO("VBus configuration\n\r");
+
+ // Configure PIO
+ PIO_Configure(&pinVbus, 1);
+ PIO_ConfigureIt(&pinVbus, ISR_Vbus);
+ PIO_EnableIt(&pinVbus);
+
+ // Check current level on VBus
+ if (PIO_Get(&pinVbus)) {
+
+ // if VBUS present, force the connect
+ TRACE_INFO("VBUS conn\n\r");
+ USBD_Connect();
+ }
+ else {
+ TRACE_INFO("VBUS discon\n\r");
+ USBD_Disconnect();
+ }
+}
+
+#else
+ #define VBUS_CONFIGURE() USBD_Connect()
+#endif //#if defined(PIN_USB_VBUS)
+
+#if defined (CP15_PRESENT)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ PMC_CPUInIdleMode();
+}
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+}
+
+#elif defined(at91sam7a3)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ PMC_DisableProcessorClock();
+}
+//------------------------------------------------------------------------------
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+}
+
+#elif defined (at91sam7se)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ // Voltage regulator in standby mode : Enable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR |= AT91C_VREG_PSTDBY;
+
+ PMC_DisableProcessorClock();
+}
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // Voltage regulator in normal mode : Disable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR &= ~AT91C_VREG_PSTDBY;
+
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+}
+
+#elif defined (at91sam7s)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ // Voltage regulator in standby mode : Enable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR |= AT91C_VREG_PSTDBY;
+
+ PMC_DisableProcessorClock();
+}
+
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // Voltage regulator in normal mode : Disable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR &= ~AT91C_VREG_PSTDBY;
+
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+
+}
+
+#elif defined (at91sam7x) || defined (at91sam7xc)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ // Voltage regulator in standby mode : Enable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR |= AT91C_VREG_PSTDBY;
+
+ PMC_DisableProcessorClock();
+}
+
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // Voltage regulator in normal mode : Disable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR &= ~AT91C_VREG_PSTDBY;
+
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+}
+#else
+//------------------------------------------------------------------------------
+/// Put the CPU in low power mode (for customer)
+//------------------------------------------------------------------------------
+static void LowPowerMode(void)
+{
+}
+
+//------------------------------------------------------------------------------
+/// Return the CPU to normal speed (for customer)
+//------------------------------------------------------------------------------
+static void NormalPowerMode(void)
+{
+}
+#endif
+
+//------------------------------------------------------------------------------
+// Callbacks re-implementation
+//------------------------------------------------------------------------------
+//------------------------------------------------------------------------------
+/// Invoked when the USB device leaves the Suspended state. By default,
+/// configures the LEDs.
+//------------------------------------------------------------------------------
+void USBDCallbacks_Resumed(void)
+{
+ // Initialize LEDs
+ LED_Configure(USBD_LEDPOWER);
+ LED_Set(USBD_LEDPOWER);
+ LED_Configure(USBD_LEDUSB);
+ LED_Clear(USBD_LEDUSB);
+ USBState = STATE_RESUME;
+}
+
+//------------------------------------------------------------------------------
+/// Invoked when the USB device gets suspended. By default, turns off all LEDs.
+//------------------------------------------------------------------------------
+void USBDCallbacks_Suspended(void)
+{
+ // Turn off LEDs
+ LED_Clear(USBD_LEDPOWER);
+ LED_Clear(USBD_LEDUSB);
+ USBState = STATE_SUSPEND;
+}
+
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Initializes the system, connects the USB and waits indefinitely.
+//------------------------------------------------------------------------------
+int main()
+{
+ TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
+ printf("-- USB Benchmark Project %s --\n\r", SOFTPACK_VERSION);
+ printf("-- %s\n\r", BOARD_NAME);
+ printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
+
+ // If they are present, configure Vbus & Wake-up pins
+ PIO_InitializeInterrupts(0);
+
+ // If there is on board power, switch it off
+ #ifdef PIN_USB_POWER_ENB
+ { const Pin pinUsbPwr = PIN_USB_POWER_ENB;
+ PIO_Configure(&pinUsbPwr, 1);
+ }
+ #endif
+
+ // USB initialization, Disable Pull-up
+ TRACE_INFO("USB initialization\n\r");
+ benchmark_drv_init();
+
+ // Wait about 10ms so that host detach the device to re-enumerate
+ // Device connection
+ TRACE_INFO("Connecting device\n\r");
+
+ // Enable Vbus detect, connect if needed (vbus detected)
+ VBUS_CONFIGURE();
+ while (USBD_GetState() < USBD_STATE_CONFIGURED);
+
+ //benchmark_start(2);
+ benchmark_start(5);
+
+ // Infinite loop
+ while (1) {
+ if( USBState == STATE_SUSPEND ) {
+ TRACE_DEBUG("suspend !\n\r");
+ LowPowerMode();
+ USBState = STATE_IDLE;
+ }
+ if( USBState == STATE_RESUME ) {
+ // Return in normal MODE
+ TRACE_DEBUG("resume !\n\r");
+ NormalPowerMode();
+ USBState = STATE_IDLE;
+ }
+ }
+}
+
diff --git a/usb-benchmark-project/obj/.empty_dir b/usb-benchmark-project/obj/.empty_dir
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/usb-benchmark-project/obj/.empty_dir
diff --git a/usb-benchmark-project/usb_desc.c b/usb-benchmark-project/usb_desc.c
new file mode 100644
index 0000000..a17afff
--- /dev/null
+++ b/usb-benchmark-project/usb_desc.c
@@ -0,0 +1,289 @@
+#include <stdlib.h>
+
+#include <board.h>
+
+#include <usb/common/core/USBGenericDescriptor.h>
+#include <usb/common/core/USBDeviceDescriptor.h>
+#include <usb/common/core/USBConfigurationDescriptor.h>
+#include <usb/common/core/USBInterfaceDescriptor.h>
+#include <usb/common/core/USBEndpointDescriptor.h>
+//#include <usb/common/core/USBStringDescriptor.h>
+
+#include <usb/device/core/USBDDriver.h>
+#include <usb/device/core/USBDDriverDescriptors.h>
+
+#define MIN(a, b) ((a < b) ? a : b)
+
+#define ISOCH
+
+struct perf_conf_descs {
+ USBConfigurationDescriptor configuration;
+ USBInterfaceDescriptor interface;
+ USBEndpointDescriptor bulkOut;
+ USBEndpointDescriptor bulkIn;
+ USBEndpointDescriptor bulkIn5;
+} __attribute__((packed));
+
+static const USBDeviceDescriptor dev_desc = {
+ .bLength = sizeof(USBDeviceDescriptor),
+ .bDescriptorType = USBGenericDescriptor_DEVICE,
+ .bcdUSB = USBDeviceDescriptor_USB2_00,
+ .bDeviceClass = 0xff,
+ .bDeviceSubClass = 0xff,
+ .bDeviceProtocol = 0xff,
+ .bMaxPacketSize0 = CHIP_USB_ENDPOINTS_MAXPACKETSIZE(0),
+ .idVendor = 0x16c0,
+ .idProduct = 0x0763,
+ .bcdDevice = 0x0100,
+ .iManufacturer = 0,
+ .iProduct = 0,
+ .iSerialNumber = 0,
+ .bNumConfigurations = 1,
+};
+
+static const USBDeviceQualifierDescriptor qual_desc = {
+ .bLength = sizeof(USBDeviceQualifierDescriptor),
+ .bDescriptorType = USBGenericDescriptor_DEVICEQUALIFIER,
+ .bcdUSB = USBDeviceDescriptor_USB2_00,
+ .bDeviceClass = 0xff,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0xff,
+ .bMaxPacketSize0 = CHIP_USB_ENDPOINTS_MAXPACKETSIZE(0),
+ .bNumConfigurations = 1,
+ .bReserved = 0,
+};
+
+static const struct perf_conf_descs conf_desc = {
+ .configuration = {
+ .bLength = sizeof(USBConfigurationDescriptor),
+ .bDescriptorType = USBGenericDescriptor_CONFIGURATION,
+ .wTotalLength = sizeof(struct perf_conf_descs),
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = BOARD_USB_BMATTRIBUTES,
+ .bMaxPower = USBConfigurationDescriptor_POWER(100),
+ },
+ .interface = {
+ .bLength = sizeof(USBInterfaceDescriptor),
+ .bDescriptorType = USBGenericDescriptor_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 3,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0xff,
+ .iInterface = 0,
+ },
+ .bulkOut = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_OUT, 1),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(1), USBEndpointDescriptor_MAXBULKSIZE_FS),
+ .bInterval = 0,
+ },
+ .bulkIn = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 2),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(2), USBEndpointDescriptor_MAXBULKSIZE_FS),
+ .bInterval = 0,
+ },
+ .bulkIn5 = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 5),
+#ifdef ISOCH
+ .bmAttributes = USBEndpointDescriptor_ISOCHRONOUS,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXISOCHRONOUSSIZE_FS),
+ .bInterval = 0,
+#else
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXBULKSIZE_FS),
+ .bInterval = 0x04,
+#endif
+ },
+};
+static const struct perf_conf_descs conf_desc_hs = {
+ .configuration = {
+ .bLength = sizeof(USBConfigurationDescriptor),
+ .bDescriptorType = USBGenericDescriptor_CONFIGURATION,
+ .wTotalLength = sizeof(struct perf_conf_descs),
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = BOARD_USB_BMATTRIBUTES,
+ .bMaxPower = USBConfigurationDescriptor_POWER(100),
+ },
+ .interface = {
+ .bLength = sizeof(USBInterfaceDescriptor),
+ .bDescriptorType = USBGenericDescriptor_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 3,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0xff,
+ .iInterface = 0,
+ },
+ .bulkOut = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_OUT, 1),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(1), USBEndpointDescriptor_MAXBULKSIZE_HS),
+ .bInterval = 0,
+ },
+ .bulkIn = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 2),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(2), USBEndpointDescriptor_MAXBULKSIZE_HS),
+ .bInterval = 0,
+ },
+ .bulkIn5 = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 5),
+
+#ifdef ISOCH
+ .bmAttributes = USBEndpointDescriptor_ISOCHRONOUS,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXISOCHRONOUSSIZE_HS),
+ .bInterval = 0,
+#else
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXBULKSIZE_HS),
+ .bInterval = 0,
+#endif
+ },
+};
+
+static const struct perf_conf_descs conf_desc_other_fs = {
+ .configuration = {
+ .bLength = sizeof(USBConfigurationDescriptor),
+ .bDescriptorType = USBGenericDescriptor_OTHERSPEEDCONFIGURATION,
+ .wTotalLength = sizeof(struct perf_conf_descs),
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = BOARD_USB_BMATTRIBUTES,
+ .bMaxPower = USBConfigurationDescriptor_POWER(100),
+ },
+ .interface = {
+ .bLength = sizeof(USBInterfaceDescriptor),
+ .bDescriptorType = USBGenericDescriptor_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 3,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0xff,
+ .iInterface = 0,
+ },
+ .bulkOut = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_OUT, 1),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(1), USBEndpointDescriptor_MAXBULKSIZE_FS),
+ .bInterval = 0,
+ },
+ .bulkIn = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 2),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(2), USBEndpointDescriptor_MAXBULKSIZE_FS),
+ .bInterval = 0,
+ },
+ .bulkIn5 = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 5),
+#ifdef ISOCH
+ .bmAttributes = USBEndpointDescriptor_ISOCHRONOUS,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXISOCHRONOUSSIZE_FS),
+ .bInterval = 0x04,
+#else
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXBULKSIZE_FS),
+ .bInterval = 0,
+#endif
+ },
+};
+static const struct perf_conf_descs conf_desc_other_hs = {
+ .configuration = {
+ .bLength = sizeof(USBConfigurationDescriptor),
+ .bDescriptorType = USBGenericDescriptor_OTHERSPEEDCONFIGURATION,
+ .wTotalLength = sizeof(struct perf_conf_descs),
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = BOARD_USB_BMATTRIBUTES,
+ .bMaxPower = USBConfigurationDescriptor_POWER(100),
+ },
+ .interface = {
+ .bLength = sizeof(USBInterfaceDescriptor),
+ .bDescriptorType = USBGenericDescriptor_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 3,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0xff,
+ .iInterface = 0,
+ },
+ .bulkOut = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_OUT, 1),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(1), USBEndpointDescriptor_MAXBULKSIZE_HS),
+ .bInterval = 0,
+ },
+ .bulkIn = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 2),
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(2), USBEndpointDescriptor_MAXBULKSIZE_HS),
+ .bInterval = 0,
+ },
+ .bulkIn5 = {
+ .bLength = sizeof(USBEndpointDescriptor),
+ .bDescriptorType = USBGenericDescriptor_ENDPOINT,
+ .bEndpointAddress = USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN, 5),
+#ifdef ISOCH
+ .bmAttributes = USBEndpointDescriptor_ISOCHRONOUS,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXISOCHRONOUSSIZE_HS),
+ .bInterval = 0x04,
+#else
+ .bmAttributes = USBEndpointDescriptor_BULK,
+ .wMaxPacketSize = MIN(CHIP_USB_ENDPOINTS_MAXPACKETSIZE(5), USBEndpointDescriptor_MAXBULKSIZE_HS),
+ .bInterval = 0,
+#endif
+ },
+};
+
+const USBDDriverDescriptors usb_perf_driver_desc = {
+ .pFsDevice = &dev_desc,
+ .pFsConfiguration = &conf_desc,
+ .pFsQualifier = &qual_desc,
+ .pFsOtherSpeed = &conf_desc_other_fs,
+ .pHsDevice = &dev_desc,
+ .pHsConfiguration = &conf_desc_hs,
+ .pHsQualifier = &qual_desc,
+ .pHsOtherSpeed = &conf_desc_other_hs,
+ .pStrings = NULL,
+ .numStrings = 0,
+};
+
+#if 0
+static USBDDriver perftest_usbdriver = {
+ .pDescriptors = &driver_desc,
+ //.pInterfaces =
+};
+#endif
personal git repositories of Harald Welte. Your mileage may vary