1 files changed, 0 insertions, 226 deletions
diff --git a/sdr-test-project/Makefile b/sdr-test-project/Makefile
deleted file mode 100644
index 7072572..0000000
--- a/sdr-test-project/Makefile
+++ /dev/null
@@ -1,226 +0,0 @@
-# ----------------------------------------------------------------------------
-#         ATMEL Microcontroller Software Support 
-# ----------------------------------------------------------------------------
-# Copyright (c) 2008, Atmel Corporation
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# - Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the disclaimer below.
-#
-# Atmel's name may not be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# ----------------------------------------------------------------------------
-
-# 	Makefile for compiling basic-ssc-i2s-at73c213-project
-
-#-------------------------------------------------------------------------------
-#		User-modifiable options
-#-------------------------------------------------------------------------------
-
-# Chip & board used for compilation
-# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
-CHIP  = at91sam3u4
-BOARD = osmo-sdr
-
-# Trace level used for compilation
-# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
-# TRACE_LEVEL_DEBUG      5
-# TRACE_LEVEL_INFO       4
-# TRACE_LEVEL_WARNING    3
-# TRACE_LEVEL_ERROR      2
-# TRACE_LEVEL_FATAL      1
-# TRACE_LEVEL_NO_TRACE   0
-TRACE_LEVEL = 5
-
-# Optimization level, put in comment for debugging
-#OPTIMIZATION = -Os
-
-# AT91 library directory
-AT91LIB = ../../at91lib
-
-# External library
-EXT_LIBS= ../external_libs
-
-# Output file basename
-OUTPUT = osmo-sdr-test-$(BOARD)-$(CHIP)
-
-# Compile with chip specific features
-include $(AT91LIB)/boards/$(BOARD)/$(CHIP)/chip.mak
-
-# Compile for all memories available on the board (this sets $(MEMORIES))
-include $(AT91LIB)/boards/$(BOARD)/board.mak
-
-# Output directories
-BIN = bin
-OBJ = obj
-
-#-------------------------------------------------------------------------------
-#		Tools
-#-------------------------------------------------------------------------------
-
-# Tool suffix when cross-compiling
-CROSS_COMPILE = arm-cm3-eabi-
-
-# Compilation tools
-CC = $(CROSS_COMPILE)gcc
-SIZE = $(CROSS_COMPILE)size
-STRIP = $(CROSS_COMPILE)strip
-OBJCOPY = $(CROSS_COMPILE)objcopy
-
-# Flags
-INCLUDES += -I$(AT91LIB)/boards/$(BOARD)
-INCLUDES += -I$(AT91LIB)/peripherals
-INCLUDES += -I$(AT91LIB)/components
-INCLUDES += -I$(AT91LIB)/drivers
-INCLUDES += -I$(AT91LIB)
-INCLUDES += -I../../osmo-sdr/firmware/include
-INCLUDES += -I$(AT91LIB)/memories
-INCLUDES += -I.
-INCLUDES += -I$(EXT_LIBS)
-INCLUDES += -I$(EXT_LIBS)/cmsis
-
-ifeq ($(CHIP_CORE), cortexm3)
-TARGET_OPTS = -mcpu=cortex-m3 -mthumb
-else
-TARGET_OPTS =
-endif
-
-CFLAGS += $(TARGET_OPTS)
-CFLAGS += -Wall -mlong-calls -ffunction-sections -fno-exceptions
-CFLAGS += -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL)
-ASFLAGS = $(TARGET_OPTS) -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
-LDFLAGS = -g $(OPTIMIZATION) -nostartfiles $(TARGET_OPTS) -Wl,--gc-sections
-
-#-------------------------------------------------------------------------------
-#		Files
-#-------------------------------------------------------------------------------
-
-# Directories where source files can be found
-PERIPH = $(AT91LIB)/peripherals
-BOARDS = $(AT91LIB)/boards
-UTILITY = $(AT91LIB)/utility
-COMP = $(AT91LIB)/components
-DRIVER = $(AT91LIB)/drivers
-MEM = $(AT91LIB)/memories
-MEM = $(EXT_LIBS)/memories
-
-VPATH += $(UTILITY)
-VPATH += $(PERIPH)/dbgu
-VPATH += $(PERIPH)/pio
-VPATH += $(PERIPH)/irq
-VPATH += $(PERIPH)/ssc
-VPATH += $(PERIPH)/twi
-VPATH += $(PERIPH)/pmc
-VPATH += $(PERIPH)/cp15
-VPATH += $(BOARDS)/$(BOARD)
-VPATH += $(BOARDS)/$(BOARD)/$(CHIP)
-#VPATH += $(PERIPH)/mci
-VPATH += $(DRIVER)/twi
-#VPATH += $(MEM)/sdmmc
-VPATH += $(PERIPH)/dma
-VPATH += $(DRIVER)/dmad
-VPATH += $(FATFS)/src
-VPATH += $(MEM)
-VPATH += $(EXT_LIBS)/cmsis
-VPATH += ../../osmo-sdr/firmware/src
-
-# Objects built from C source files
-C_OBJECTS += main.o
-C_OBJECTS += stdio.o
-C_OBJECTS += math.o
-C_OBJECTS += dbgu.o
-C_OBJECTS += pio.o
-C_OBJECTS += ssc.o
-C_OBJECTS += twi.o
-C_OBJECTS += pmc.o
-C_OBJECTS += twid.o
-C_OBJECTS += board_lowlevel.o
-C_OBJECTS += trace.o
-C_OBJECTS += led.o
-C_OBJECTS += board_memories.o
-
-C_OBJECTS += logging.o
-C_OBJECTS += tuner_e4k.o
-C_OBJECTS += tuner_e4k_transport.o
-C_OBJECTS += si570.o
-C_OBJECTS += osdr_fpga.o
-
-
-# Objects for different chips
-ifeq ($(CHIP_CORE), cortexm3)
-C_OBJECTS += nvic.o
-C_OBJECTS += exceptions.o
-C_OBJECTS += board_cstartup_gnu.o
-C_OBJECTS += core_cm3.o
-else
-C_OBJECTS += aic.o
-C_OBJECTS += cp15.o
-C_OBJECTS += pit.o
-endif
-
-ifeq ($(CHIP_IP_MCI), MCI_DMA)
-C_OBJECTS += dmad.o
-C_OBJECTS += dma.o
-#C_OBJECTS += mci_hs.o
-else
-C_OBJECTS += mci.o
-endif
-
-# Objects built from Assembly source files
-ifneq ($(CHIP_CORE), cortexm3)
-ASM_OBJECTS += board_cstartup.o
-ASM_OBJECTS += cp15_asm.o
-endif
-
-# Append OBJ and BIN directories to output filename
-OUTPUT := $(BIN)/$(OUTPUT)
-
-#-------------------------------------------------------------------------------
-#		Rules
-#-------------------------------------------------------------------------------
-
-all: $(BIN) $(OBJ) $(MEMORIES)
-
-$(BIN) $(OBJ):
-	mkdir $@
-
-define RULES
-C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
-ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
-
-$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
-	$(CC) $(LDFLAGS) -T"$(AT91LIB)/boards/$(BOARD)/$(CHIP)/$$@.lds" -o $(OUTPUT)-$$@.elf $$^
-	$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
-	$(SIZE) $$^ $(OUTPUT)-$$@.elf
-
-$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
-	$(CC) $(CFLAGS) -D$(1) -c -o $$@ $$<
-
-$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
-	$(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<
-
-debug_$(1): $(1)
-	perl ../resources/gdb/debug.pl $(OUTPUT)-$(1).elf
-
-endef
-
-$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
-
-clean:
-	-rm -f $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf
-