diff options
| author | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
|---|---|---|
| committer | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
| commit | 044ad7c3987460ede48ff27afd6bdb0ca05a0432 (patch) | |
| tree | 924818cdb0d39ca08aec540d18da7bd406eaae8c /peripherals/ssc | |
import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
Diffstat (limited to 'peripherals/ssc')
| -rw-r--r-- | peripherals/ssc/ssc.c | 413 | ||||
| -rw-r--r-- | peripherals/ssc/ssc.h | 156 |
2 files changed, 569 insertions, 0 deletions
diff --git a/peripherals/ssc/ssc.c b/peripherals/ssc/ssc.c new file mode 100644 index 0000000..52a8566 --- /dev/null +++ b/peripherals/ssc/ssc.c @@ -0,0 +1,413 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include "ssc.h"
+#include <utility/trace.h>
+#if defined(CHIP_SSC_DMA)
+#include <dma/dma.h>
+#include <dmad/dmad.h>
+#endif
+
+//------------------------------------------------------------------------------
+// Local variables
+//------------------------------------------------------------------------------
+#if defined(CHIP_SSC_DMA)
+static DmaLinkList LLI_CH [MAX_SSC_LLI_SIZE];
+#endif
+
+//------------------------------------------------------------------------------
+// Local macros
+//------------------------------------------------------------------------------
+#if defined(CHIP_SSC_DMA)
+#define LAST_ROW 0x100
+#endif
+
+//------------------------------------------------------------------------------
+// Internal Functions
+//------------------------------------------------------------------------------
+#if defined(CHIP_SSC_DMA)
+static void AT91F_Prepare_Multiple_Transfer(unsigned int Channel,
+ unsigned int LLI_rownumber,
+ unsigned int LLI_Last_Row,
+ unsigned int From_add,
+ unsigned int To_add,
+ unsigned int Ctrla,
+ unsigned int Ctrlb)
+{
+ LLI_CH[LLI_rownumber].sourceAddress = From_add;
+ LLI_CH[LLI_rownumber].destAddress = To_add;
+ LLI_CH[LLI_rownumber].controlA = Ctrla;
+ LLI_CH[LLI_rownumber].controlB = Ctrlb;
+ if (LLI_Last_Row != LAST_ROW)
+ LLI_CH[LLI_rownumber].descriptor =
+ (unsigned int)&LLI_CH[LLI_rownumber + 1] + 0;
+ else
+ LLI_CH[LLI_rownumber].descriptor = 0;
+}
+#endif
+
+//------------------------------------------------------------------------------
+// Exported functions
+//------------------------------------------------------------------------------
+//------------------------------------------------------------------------------
+/// Configures a SSC peripheral. If the divided clock is not used, the master
+/// clock frequency can be set to 0.
+/// \note The emitter and transmitter are disabled by this function.
+/// \param ssc Pointer to an AT91S_SSC instance.
+/// \param id Peripheral ID of the SSC.
+//------------------------------------------------------------------------------
+void SSC_Configure(AT91S_SSC *ssc,
+ unsigned int id,
+ unsigned int bitRate,
+ unsigned int masterClock)
+{
+ // Enable SSC peripheral clock
+ AT91C_BASE_PMC->PMC_PCER = 1 << id;
+
+ // Reset, disable receiver & transmitter
+ ssc->SSC_CR = AT91C_SSC_RXDIS | AT91C_SSC_TXDIS | AT91C_SSC_SWRST;
+
+ #if !defined(CHIP_SSC_DMA)
+ ssc->SSC_PTCR = AT91C_PDC_RXTDIS | AT91C_PDC_TXTDIS;
+ #endif
+
+ // Configure clock frequency
+ if (bitRate != 0) {
+
+ ssc->SSC_CMR = masterClock / (2 * bitRate);
+ }
+ else {
+
+ ssc->SSC_CMR = 0;
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the transmitter of a SSC peripheral. Several macros can be used
+/// to compute the values of the Transmit Clock Mode Register (TCMR) and the
+/// Transmit Frame Mode Register (TFMR) (see "SSC configuration macros").
+/// \param ssc Pointer to a AT91S_SSC instance.
+/// \param tcmr Transmit Clock Mode Register value.
+/// \param tfmr Transmit Frame Mode Register value.
+//------------------------------------------------------------------------------
+void SSC_ConfigureTransmitter(AT91S_SSC *ssc,
+ unsigned int tcmr,
+ unsigned int tfmr)
+{
+ ssc->SSC_TCMR = tcmr;
+ ssc->SSC_TFMR = tfmr;
+}
+
+//------------------------------------------------------------------------------
+/// Configures the receiver of a SSC peripheral. Several macros can be used
+/// to compute the values of the Receive Clock Mode Register (TCMR) and the
+/// Receive Frame Mode Register (TFMR) (see "SSC configuration macros").
+/// \param ssc Pointer to a AT91S_SSC instance.
+/// \param rcmr Receive Clock Mode Register value.
+/// \param rfmr Receive Frame Mode Register value.
+//------------------------------------------------------------------------------
+void SSC_ConfigureReceiver(AT91S_SSC *ssc,
+ unsigned int rcmr,
+ unsigned int rfmr)
+{
+ ssc->SSC_RCMR = rcmr;
+ ssc->SSC_RFMR = rfmr;
+}
+
+//------------------------------------------------------------------------------
+/// Enables the transmitter of a SSC peripheral.
+/// \param ssc Pointer to an AT91S_SSC instance.
+//------------------------------------------------------------------------------
+void SSC_EnableTransmitter(AT91S_SSC *ssc)
+{
+ ssc->SSC_CR = AT91C_SSC_TXEN;
+}
+
+//------------------------------------------------------------------------------
+/// Disables the transmitter of a SSC peripheral.
+/// \param ssc Pointer to an AT91S_SSC instance.
+//------------------------------------------------------------------------------
+void SSC_DisableTransmitter(AT91S_SSC *ssc)
+{
+ ssc->SSC_CR = AT91C_SSC_TXDIS;
+}
+
+//------------------------------------------------------------------------------
+/// Enables the receiver of a SSC peripheral.
+/// \param ssc Pointer to an AT91S_SSC instance.
+//------------------------------------------------------------------------------
+void SSC_EnableReceiver(AT91S_SSC *ssc)
+{
+ ssc->SSC_CR = AT91C_SSC_RXEN;
+}
+
+//------------------------------------------------------------------------------
+/// Disables the receiver of a SSC peripheral.
+/// \param ssc Pointer to an AT91S_SSC instance.
+//------------------------------------------------------------------------------
+void SSC_DisableReceiver(AT91S_SSC *ssc)
+{
+ ssc->SSC_CR = AT91C_SSC_RXDIS;
+}
+
+//------------------------------------------------------------------------------
+/// Enables one or more interrupt sources of a SSC peripheral.
+/// \param ssc Pointer to an AT91S_SSC instance.
+/// \param sources Interrupt sources to enable.
+//------------------------------------------------------------------------------
+void SSC_EnableInterrupts(AT91S_SSC *ssc, unsigned int sources)
+{
+ ssc->SSC_IER = sources;
+}
+
+//------------------------------------------------------------------------------
+/// Disables one or more interrupt sources of a SSC peripheral.
+/// \param ssc Pointer to an AT91S_SSC instance.
+/// \param sources Interrupt source to disable.
+//------------------------------------------------------------------------------
+void SSC_DisableInterrupts(AT91S_SSC *ssc, unsigned int sources)
+{
+ ssc->SSC_IDR = sources;
+}
+
+//------------------------------------------------------------------------------
+/// Sends one data frame through a SSC peripheral. If another frame is currently
+/// being sent, this function waits for the previous transfer to complete.
+/// \param ssc Pointer to an AT91S_SSC instance.
+/// \param frame Data frame to send.
+//------------------------------------------------------------------------------
+void SSC_Write(AT91S_SSC *ssc, unsigned int frame)
+{
+ while ((ssc->SSC_SR & AT91C_SSC_TXRDY) == 0);
+ ssc->SSC_THR = frame;
+}
+
+//------------------------------------------------------------------------------
+/// Sends the contents of a data buffer a SSC peripheral, using the PDC. Returns
+/// true if the buffer has been queued for transmission; otherwise returns
+/// false.
+/// \param ssc Pointer to an AT91S_SSC instance.
+/// \param buffer Data buffer to send.
+/// \param length Size of the data buffer.
+//------------------------------------------------------------------------------
+unsigned char SSC_WriteBuffer(AT91S_SSC *ssc,
+ void *buffer,
+ unsigned int length)
+{
+#if !defined(CHIP_SSC_DMA)
+ // Check if first bank is free
+ if (ssc->SSC_TCR == 0) {
+
+ ssc->SSC_TPR = (unsigned int) buffer;
+ ssc->SSC_TCR = length;
+ ssc->SSC_PTCR = AT91C_PDC_TXTEN;
+ return 1;
+ }
+ // Check if second bank is free
+ else if (ssc->SSC_TNCR == 0) {
+
+ ssc->SSC_TNPR = (unsigned int) buffer;
+ ssc->SSC_TNCR = length;
+ return 1;
+ }
+#else
+
+ #if defined(SSC_DMA_WORD)
+ unsigned int* startSourceAddr;
+ unsigned int* startDestAddr;
+ #elif defined(SSC_DMA_HALFWORD)
+ unsigned short* startSourceAddr;
+ unsigned short* startDestAddr;
+ #endif
+ unsigned int srcAddress;
+ unsigned int destAddress;
+ unsigned int buffSize;
+ unsigned int LLI_rownumber = 0;
+ unsigned int ctrla;
+
+ #if defined(SSC_DMA_WORD)
+ startSourceAddr = (unsigned int*)(buffer);
+ startDestAddr = (unsigned int*)(&ssc->SSC_THR);
+ #elif defined(SSC_DMA_HALFWORD)
+ startSourceAddr = (unsigned short*)(buffer);
+ startDestAddr = (unsigned short*)(&ssc->SSC_THR);
+ #endif
+ srcAddress = (unsigned int)startSourceAddr; // Set the data start address
+ destAddress = (unsigned int)startDestAddr;
+ buffSize = length;
+ if(buffSize > 0x8000){
+ TRACE_WARNING("SSC DMA, size too big %d\n\r", buffSize);
+ buffSize = 0x8000;
+ }
+
+ // Set DMA channel DSCR
+ DMA_SetDescriptorAddr(BOARD_SSC_DMA_CHANNEL, (unsigned int)&LLI_CH[0]);
+
+ // Clear any pending interrupts
+ DMA_GetStatus();
+
+ //Set DMA channel control B
+ DMA_SetSourceBufferMode(BOARD_SSC_DMA_CHANNEL, DMA_TRANSFER_LLI,
+ (AT91C_HDMA_SRC_ADDRESS_MODE_INCR >> 24));
+ DMA_SetDestBufferMode(BOARD_SSC_DMA_CHANNEL, DMA_TRANSFER_LLI,
+ (AT91C_HDMA_DST_ADDRESS_MODE_FIXED >> 28));
+ DMA_SetFlowControl(BOARD_SSC_DMA_CHANNEL, AT91C_HDMA_FC_MEM2PER >> 21);
+
+ // Set DMA channel config
+ DMA_SetConfiguration(BOARD_SSC_DMA_CHANNEL, BOARD_SSC_DMA_HW_SRC_REQ_ID \
+ | BOARD_SSC_DMA_HW_DEST_REQ_ID \
+ | AT91C_HDMA_SRC_H2SEL_SW \
+ | AT91C_HDMA_DST_H2SEL_HW \
+ | AT91C_HDMA_SOD_DISABLE \
+ | AT91C_HDMA_FIFOCFG_LARGESTBURST);
+
+ // Set link list
+ while(srcAddress < ((unsigned int)(startSourceAddr + buffSize)))
+ {
+ if(((unsigned int)(startSourceAddr + buffSize)) - srcAddress <= (BOARD_SSC_DMA_FIFO_SIZE) )
+ {
+
+ #if defined(SSC_DMA_WORD)
+ ctrla = (((((unsigned int)(startSourceAddr + buffSize))
+ - srcAddress)/4)
+ | AT91C_HDMA_SRC_WIDTH_WORD
+ | AT91C_HDMA_DST_WIDTH_WORD
+ | AT91C_HDMA_SCSIZE_4
+ | AT91C_HDMA_DCSIZE_1
+ );
+ #elif defined(SSC_DMA_HALFWORD)
+ ctrla = (((((unsigned int)(startSourceAddr + buffSize))
+ - srcAddress)/2)
+ | AT91C_HDMA_SRC_WIDTH_HALFWORD
+ | AT91C_HDMA_DST_WIDTH_HALFWORD
+ | AT91C_HDMA_SCSIZE_1
+ | AT91C_HDMA_DCSIZE_1
+ );
+ #endif
+ AT91F_Prepare_Multiple_Transfer(BOARD_SSC_DMA_CHANNEL, LLI_rownumber, LAST_ROW,
+ srcAddress,
+ destAddress,
+ ctrla,
+ ( //| AT91C_HDMA_DST_DSCR_FETCH_FROM_MEM
+ AT91C_HDMA_DST_DSCR_FETCH_DISABLE
+ | AT91C_HDMA_DST_ADDRESS_MODE_FIXED
+ | AT91C_HDMA_SRC_DSCR_FETCH_FROM_MEM
+ //| AT91C_HDMA_SRC_DSCR_FETCH_DISABLE
+ | AT91C_HDMA_SRC_ADDRESS_MODE_INCR
+ | AT91C_HDMA_FC_MEM2PER));
+ }
+ else
+ {
+
+ #if defined(SSC_DMA_WORD)
+ ctrla = (((BOARD_SSC_DMA_FIFO_SIZE)/4)
+ | AT91C_HDMA_SRC_WIDTH_WORD
+ | AT91C_HDMA_DST_WIDTH_WORD
+ | AT91C_HDMA_SCSIZE_4
+ | AT91C_HDMA_DCSIZE_1
+ );
+ #elif defined(SSC_DMA_HALFWORD)
+ ctrla = (((BOARD_SSC_DMA_FIFO_SIZE)/2)
+ | AT91C_HDMA_SRC_WIDTH_HALFWORD
+ | AT91C_HDMA_DST_WIDTH_HALFWORD
+ | AT91C_HDMA_SCSIZE_1
+ | AT91C_HDMA_DCSIZE_1
+ );
+ #endif
+ AT91F_Prepare_Multiple_Transfer(BOARD_SSC_DMA_CHANNEL, LLI_rownumber, 0,
+ srcAddress,
+ destAddress,
+ ctrla,
+ ( //| AT91C_HDMA_DST_DSCR_FETCH_FROM_MEM
+ AT91C_HDMA_DST_DSCR_FETCH_DISABLE
+ | AT91C_HDMA_DST_ADDRESS_MODE_FIXED
+ | AT91C_HDMA_SRC_DSCR_FETCH_FROM_MEM
+ //| AT91C_HDMA_SRC_DSCR_FETCH_DISABLE
+ | AT91C_HDMA_SRC_ADDRESS_MODE_INCR
+ | AT91C_HDMA_FC_MEM2PER));
+
+ }
+
+ srcAddress += BOARD_SSC_DMA_FIFO_SIZE;
+
+
+ LLI_rownumber++;
+ }
+#endif
+ // No free banks
+ return 0;
+}
+
+//------------------------------------------------------------------------------
+/// Waits until one frame is received on a SSC peripheral, and returns it.
+/// \param ssc Pointer to an AT91S_SSC instance.
+//------------------------------------------------------------------------------
+unsigned int SSC_Read(AT91S_SSC *ssc)
+{
+ while ((ssc->SSC_SR & AT91C_SSC_RXRDY) == 0);
+ return ssc->SSC_RHR;
+}
+
+//------------------------------------------------------------------------------
+/// Reads data coming from a SSC peripheral receiver and stores it into the
+/// provided buffer. Returns true if the buffer has been queued for reception;
+/// otherwise returns false.
+/// \param ssc Pointer to an AT91S_SSC instance.
+/// \param buffer Data buffer used for reception.
+/// \param length Size in bytes of the data buffer.
+//------------------------------------------------------------------------------
+unsigned char SSC_ReadBuffer(AT91S_SSC *ssc,
+ void *buffer,
+ unsigned int length)
+{
+#if !defined(CHIP_SSC_DMA)
+ // Check if the first bank is free
+ if (ssc->SSC_RCR == 0) {
+
+ ssc->SSC_RPR = (unsigned int) buffer;
+ ssc->SSC_RCR = length;
+ ssc->SSC_PTCR = AT91C_PDC_RXTEN;
+ return 1;
+ }
+ // Check if second bank is free
+ else if (ssc->SSC_RNCR == 0) {
+
+ ssc->SSC_RNPR = (unsigned int) buffer;
+ ssc->SSC_RNCR = length;
+ return 1;
+ }
+#endif
+ // No free bank
+ return 0;
+}
+
diff --git a/peripherals/ssc/ssc.h b/peripherals/ssc/ssc.h new file mode 100644 index 0000000..78295bd --- /dev/null +++ b/peripherals/ssc/ssc.h @@ -0,0 +1,156 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \dir
+/// !Purpose
+///
+/// Set of functions and definition for using a SSC peripheral.
+///
+/// !Usage
+///
+/// -# Enable the SSC interface pins (see pio & board.h).
+/// -# Configure the SSC to operate at a specific frequency by calling
+/// SSC_Configure(). This function enables the peripheral clock of the SSC,
+/// but not its PIOs.
+/// -# Configure the transmitter and/or the receiver using the
+/// SSC_ConfigureTransmitter() and SSC_ConfigureEmitter() functions.
+/// -# Enable the PIOs or the transmitter and/or the received.
+/// -# Enable the transmitter and/or the receiver using SSC_EnableTransmitter()
+/// and SSC_EnableReceiver()
+/// -# Send data through the transmitter using SSC_Write() and SSC_WriteBuffer()
+/// -# Receive data from the receiver using SSC_Read() and SSC_ReadBuffer()
+/// -# Disable the transmitter and/or the receiver using SSC_DisableTransmitter()
+/// and SSC_DisableReceiver()
+//------------------------------------------------------------------------------
+
+#ifndef SSC_H
+#define SSC_H
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include <board.h>
+
+//------------------------------------------------------------------------------
+// Definitions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SSC configuration macros"
+/// This page lists several macros which are used when configuring a SSC
+/// peripheral.
+///
+/// !Macros
+/// - SSC_STTDLY
+/// - SSC_PERIOD
+/// - SSC_DATLEN
+/// - SSC_DATNB
+/// - SSC_FSLEN
+
+/// Calculates the value of the STTDLY field given the number of clock cycles
+/// before the first bit of a new frame is transmitted.
+#define SSC_STTDLY(bits) (bits << 16)
+
+/// Calculates the value of the PERIOD field of the Transmit Clock Mode Register
+/// of an SSC interface, given the desired clock divider.
+#define SSC_PERIOD(divider) (((divider / 2) - 1) << 24)
+
+/// Calculates the value of the DATLEN field of the Transmit Frame Mode Register
+/// of an SSC interface, given the number of bits in one sample.
+#define SSC_DATLEN(bits) (bits - 1)
+
+/// Calculates the value of the DATNB field of the Transmit Frame Mode Register
+/// of an SSC interface, given the number of samples in one frame.
+#define SSC_DATNB(samples) ((samples -1) << 8)
+
+/// Calculates the value of the FSLEN field of the Transmit Frame Mode Register
+/// of an SSC interface, given the number of transmit clock periods that the
+/// frame sync signal should take.
+#define SSC_FSLEN(periods) ((periods - 1) << 16)
+
+/// SSC DMA Fifo size
+#define BOARD_SSC_DMA_FIFO_SIZE (4*1024)
+
+/// SSC Linked list size
+#define MAX_SSC_LLI_SIZE 8
+
+#define SSC_DMA_WORD
+//#define SSC_DMA_HALFWORD
+
+#define AT91C_I2S_MASTER_TX_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\
+ AT91C_SSC_CKS_DIV +\
+ AT91C_SSC_CKO_CONTINOUS +\
+ AT91C_SSC_START_FALL_RF +\
+ ((1<<16) & AT91C_SSC_STTDLY) +\
+ ((((nb_bit_by_slot*nb_slot_by_frame)/2)-1) <<24))
+
+#define AT91C_I2S_TX_FRAME_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\
+ (nb_bit_by_slot-1) +\
+ AT91C_SSC_MSBF +\
+ (((nb_slot_by_frame-1)<<8) & AT91C_SSC_DATNB) +\
+ (((nb_bit_by_slot-1)<<16) & AT91C_SSC_FSLEN) +\
+ AT91C_SSC_FSOS_NEGATIVE)
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Exported functions
+//------------------------------------------------------------------------------
+extern void SSC_Configure(AT91S_SSC *ssc,
+ unsigned int id,
+ unsigned int bitRate,
+ unsigned int masterClock);
+extern void SSC_ConfigureTransmitter(AT91S_SSC *ssc,
+ unsigned int tcmr,
+ unsigned int tfmr);
+extern void SSC_ConfigureReceiver(AT91S_SSC *ssc,
+ unsigned int rcmr,
+ unsigned int rfmr);
+
+extern void SSC_EnableTransmitter(AT91S_SSC *ssc);
+extern void SSC_DisableTransmitter(AT91S_SSC *ssc);
+extern void SSC_EnableReceiver(AT91S_SSC *ssc);
+extern void SSC_DisableReceiver(AT91S_SSC *ssc);
+
+extern void SSC_EnableInterrupts(AT91S_SSC *ssc, unsigned int sources);
+extern void SSC_DisableInterrupts(AT91S_SSC *ssc, unsigned int sources);
+
+extern void SSC_Write(AT91S_SSC *ssc, unsigned int frame);
+extern unsigned char SSC_WriteBuffer(AT91S_SSC *ssc,
+ void *buffer,
+ unsigned int length);
+extern unsigned int SSC_Read(AT91S_SSC *ssc);
+extern unsigned char SSC_ReadBuffer(AT91S_SSC *ssc,
+ void *buffer,
+ unsigned int length);
+
+#endif //#ifndef SSC_H
+
|