2 files changed, 166 insertions, 0 deletions
diff --git a/at91lib/peripherals/aic/aic.c b/at91lib/peripherals/aic/aic.c
new file mode 100644
index 0000000..4ff52c2
--- /dev/null
+++ b/at91lib/peripherals/aic/aic.c
@@ -0,0 +1,87 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support 
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+//         Headers
+//------------------------------------------------------------------------------
+
+#include "aic.h"
+#include <board.h>
+
+//------------------------------------------------------------------------------
+//         Global functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Configures an interrupt in the AIC. The interrupt is identified by its
+/// source (AT91C_ID_xxx) and is configured to use the specified mode and
+/// interrupt handler function. Mode is the value that will be put in AIC_SMRx
+/// and the function address will be set in AIC_SVRx.
+/// The interrupt is disabled before configuration, so it is useless
+/// to do it before calling this function. When AIC_ConfigureIT returns, the
+/// interrupt will always be disabled and cleared; it must be enabled by a
+/// call to AIC_EnableIT().
+/// \param source  Interrupt source to configure.
+/// \param mode  Triggering mode and priority of the interrupt.
+/// \param handler  Interrupt handler function.
+//------------------------------------------------------------------------------
+void AIC_ConfigureIT(
+    unsigned int source,
+    unsigned int mode,
+    void (*handler)(void))
+{
+    // Disable the interrupt first
+    AT91C_BASE_AIC->AIC_IDCR = 1 << source;
+
+    // Configure mode and handler
+    AT91C_BASE_AIC->AIC_SMR[source] = mode;
+    AT91C_BASE_AIC->AIC_SVR[source] = (unsigned int) handler;
+
+    // Clear interrupt
+    AT91C_BASE_AIC->AIC_ICCR = 1 << source;
+}
+
+//------------------------------------------------------------------------------
+/// Enables interrupts coming from the given (unique) source (AT91C_ID_xxx).
+/// \param source  Interrupt source to enable.
+//------------------------------------------------------------------------------
+void AIC_EnableIT(unsigned int source)
+{
+    AT91C_BASE_AIC->AIC_IECR = 1 << source;
+}
+
+//------------------------------------------------------------------------------
+/// Disables interrupts coming from the given (unique) source (AT91C_ID_xxx).
+/// \param source  Interrupt source to enable.
+//------------------------------------------------------------------------------
+void AIC_DisableIT(unsigned int source)
+{
+    AT91C_BASE_AIC->AIC_IDCR = 1 << source;
+}
+
diff --git a/at91lib/peripherals/aic/aic.h b/at91lib/peripherals/aic/aic.h
new file mode 100644
index 0000000..bddf787
--- /dev/null
+++ b/at91lib/peripherals/aic/aic.h
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support 
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \unit
+///
+/// !Purpose
+/// 
+/// Methods and definitions for configuring interrupts using the Advanced
+/// Interrupt Controller (AIC).
+/// 
+/// !Usage
+///
+/// -# Configure an interrupt source using AIC_ConfigureIT
+/// -# Enable or disable interrupt generation of a particular source with
+///    AIC_EnableIT and AIC_DisableIT.
+///
+/// \note Most of the time, peripheral interrupts must be also configured
+/// inside the peripheral itself.
+//------------------------------------------------------------------------------
+
+#ifndef AIC_H
+#define AIC_H
+
+//------------------------------------------------------------------------------
+//         Headers
+//------------------------------------------------------------------------------
+
+#include <board.h>
+
+//------------------------------------------------------------------------------
+//         Definitions
+//------------------------------------------------------------------------------
+
+#ifndef AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL
+    /// Interrupt is internal and uses a logical 1 level.
+    #define AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE
+#endif
+
+//------------------------------------------------------------------------------
+//         Global functions
+//------------------------------------------------------------------------------
+
+extern void AIC_ConfigureIT(unsigned int source,
+                                   unsigned int mode,
+                                   void (*handler)( void ));
+
+extern void AIC_EnableIT(unsigned int source);
+
+extern void AIC_DisableIT(unsigned int source);
+
+#endif //#ifndef AIC_H
+