summaryrefslogtreecommitdiff
path: root/usb-device-ccid-project
diff options
context:
space:
mode:
Diffstat (limited to 'usb-device-ccid-project')
-rw-r--r--usb-device-ccid-project/Makefile165
-rw-r--r--usb-device-ccid-project/bin/.empty0
-rw-r--r--usb-device-ccid-project/main.c561
-rw-r--r--usb-device-ccid-project/obj/.empty0
4 files changed, 726 insertions, 0 deletions
diff --git a/usb-device-ccid-project/Makefile b/usb-device-ccid-project/Makefile
new file mode 100644
index 0000000..d517d1c
--- /dev/null
+++ b/usb-device-ccid-project/Makefile
@@ -0,0 +1,165 @@
+# ----------------------------------------------------------------------------
+# ATMEL Microcontroller Software Support
+# ----------------------------------------------------------------------------
+# Copyright (c) 2008, Atmel Corporation
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# - Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the disclaimer below.
+#
+# Atmel's name may not be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# ----------------------------------------------------------------------------
+
+# Makefile for compiling usb-device-ccid-project
+
+#-------------------------------------------------------------------------------
+# User-modifiable options
+#-------------------------------------------------------------------------------
+
+# Chip & board used for compilation
+# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
+CHIP = at91sam7se512
+BOARD = at91sam7se-ek
+
+# Trace level used for compilation
+# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
+# TRACE_LEVEL_DEBUG 5
+# TRACE_LEVEL_INFO 4
+# TRACE_LEVEL_WARNING 3
+# TRACE_LEVEL_ERROR 2
+# TRACE_LEVEL_FATAL 1
+# TRACE_LEVEL_NO_TRACE 0
+TRACE_LEVEL = 3
+
+# Optimization level, put in comment for debugging
+OPTIMIZATION = -Os
+
+# AT91 library directory
+AT91LIB = ../at91lib
+
+# Output file basename
+OUTPUT = usb-device-ccid-project-$(BOARD)-$(CHIP)
+
+# Compile for all memories available on the board (this sets $(MEMORIES))
+include $(AT91LIB)/boards/$(BOARD)/board.mak
+
+# Output directories
+BIN = bin
+OBJ = obj
+
+#-------------------------------------------------------------------------------
+# Tools
+#-------------------------------------------------------------------------------
+
+# Tool suffix when cross-compiling
+CROSS_COMPILE = arm-none-eabi-
+
+# Compilation tools
+CC = $(CROSS_COMPILE)gcc
+SIZE = $(CROSS_COMPILE)size
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+
+# Flags
+INCLUDES = -I$(AT91LIB)/boards/$(BOARD) -I$(AT91LIB)/peripherals
+INCLUDES += -I$(AT91LIB)/components -I$(AT91LIB)
+
+CFLAGS = -Wall -mlong-calls -ffunction-sections
+CFLAGS += -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL)
+ASFLAGS = -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
+LDFLAGS = -g $(OPTIMIZATION) -nostartfiles -Wl,--gc-sections
+
+
+#-------------------------------------------------------------------------------
+# Files
+#-------------------------------------------------------------------------------
+
+# Directories where source files can be found
+PERIPH = $(AT91LIB)/peripherals
+BOARDS = $(AT91LIB)/boards
+UTILITY = $(AT91LIB)/utility
+USB = $(AT91LIB)/usb
+COMP = $(AT91LIB)/components
+
+VPATH += $(USB)/common/core $(USB)/device/core
+VPATH += $(UTILITY)
+VPATH += $(PERIPH)/dbgu $(PERIPH)/pio $(PERIPH)/pit $(PERIPH)/aic $(PERIPH)/pmc
+VPATH += $(PERIPH)/cp15
+VPATH += $(BOARDS)/$(BOARD) $(BOARDS)/$(BOARD)/$(CHIP)
+VPATH += $(USB)/device/ccid $(COMP)/iso7816 $(PERIPH)/usart
+
+# Objects built from C source files
+C_OBJECTS = main.o
+C_OBJECTS += USBD_OTGHS.o USBD_UDP.o USBD_UDPHS.o USBDDriver.o
+C_OBJECTS += USBDCallbacks_Initialized.o
+C_OBJECTS += USBDCallbacks_Reset.o
+#C_OBJECTS += USBDCallbacks_Resumed.o
+#C_OBJECTS += USBDCallbacks_Suspended.o
+C_OBJECTS += USBDDriverCb_CfgChanged.o
+C_OBJECTS += USBDDriverCb_IfSettingChanged.o
+C_OBJECTS += USBSetAddressRequest.o USBGenericDescriptor.o USBInterfaceRequest.o
+C_OBJECTS += USBGenericRequest.o USBGetDescriptorRequest.o
+C_OBJECTS += USBSetConfigurationRequest.o USBFeatureRequest.o
+C_OBJECTS += USBEndpointDescriptor.o USBConfigurationDescriptor.o
+C_OBJECTS += led.o math.o stdio.o
+C_OBJECTS += aic.o dbgu.o pio.o pio_it.o pit.o pmc.o cp15.o
+C_OBJECTS += board_memories.o board_lowlevel.o
+C_OBJECTS += usart.o iso7816_4.o cciddriver.o
+
+# Objects built from Assembly source files
+ASM_OBJECTS = board_cstartup.o
+ASM_OBJECTS += cp15_asm.o
+
+# Append OBJ and BIN directories to output filename
+OUTPUT := $(BIN)/$(OUTPUT)
+
+#-------------------------------------------------------------------------------
+# Rules
+#-------------------------------------------------------------------------------
+
+all: $(BIN) $(OBJ) $(MEMORIES)
+
+$(BIN) $(OBJ):
+ mkdir $@
+
+define RULES
+C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
+ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
+
+$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
+ $(CC) $(LDFLAGS) -T"$(AT91LIB)/boards/$(BOARD)/$(CHIP)/$$@.lds" -o $(OUTPUT)-$$@.elf $$^
+ $(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
+ $(SIZE) $$^ $(OUTPUT)-$$@.elf
+
+$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
+ $(CC) $(CFLAGS) -D$(1) -c -o $$@ $$<
+
+$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
+ $(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<
+
+debug_$(1): $(1)
+ perl ../resources/gdb/debug.pl $(OUTPUT)-$(1).elf
+
+endef
+
+$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
+
+clean:
+ -rm -f $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf
+
diff --git a/usb-device-ccid-project/bin/.empty b/usb-device-ccid-project/bin/.empty
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/usb-device-ccid-project/bin/.empty
diff --git a/usb-device-ccid-project/main.c b/usb-device-ccid-project/main.c
new file mode 100644
index 0000000..7badfeb
--- /dev/null
+++ b/usb-device-ccid-project/main.c
@@ -0,0 +1,561 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \dir "USB device CCID project with AT91SAM Microcontrollers"
+///
+/// !!!Purpose
+///
+/// This example demonstrates the CCID (USB Chip/Smart Card Interface Devices) on AT91
+/// microcontrollers.
+///
+/// !!!Requirements
+///
+/// This example can be used on AT91SAM9260-EK, AT91SAM9263-EK, AT91SAM9G20-EK,
+/// AT91SAM9XE-EK.
+///
+/// !!!Description
+///
+/// This application implement a CCID driver.<BR>
+/// Different tests can be done with the Windows(c) software Smart Access(c).<BR>
+/// Smart Access: a powerful scripting tool to write sequences of commands.
+///
+/// !!!Usage
+///
+/// -# Install Smart Access(c) software.
+/// -# Build the program and download it inside the evaluation board. Please
+/// refer to the <a href="http://www.atmel.com/dyn/resources/prod_documents/doc6224.pdf">SAM-BA User Guide</a>,
+/// the <a href="http://www.atmel.com/dyn/resources/prod_documents/doc6310.pdf">GNU-Based Software Development</a>
+/// application note or to the <a href="ftp://ftp.iar.se/WWWfiles/arm/Guides/EWARM_UserGuide.ENU.pdf">IAR EWARM User Guide</a>,
+/// depending on your chosen solution.
+/// -# On the computer, open and configure a terminal application (e.g.
+/// HyperTerminal on Microsoft Windows) with these settings:
+/// - 115200 bauds
+/// - 8 data bits
+/// - No parity
+/// - 1 stop bit
+/// - Hardware flow control (RTS/CTS)
+/// -# Start the application. The following traces shall appear on the terminal:
+/// \code
+/// -- USB Device CCID Project xxx --
+/// -- AT91xxxxxx-xx
+/// -- Compiled: xxx xx xxxx xx:xx:xx --
+/// \endcode
+/// -# Connect the USB cable to the board. Traces should start to appear on the terminal.<BR>
+/// If this is the first time the device is connected to the PC,
+/// the operating system may take some time to install it.
+/// -# The device is enumerated as a Smart Card Device implementing CCID class.<BR>
+/// -# The host use the CCID device driver (usbccid.sys) as the functionnal driver.
+/// -# Launch Smart Access and connect it to the Card Reader Atmel.<BR>
+/// Use Smart Access for launch instruction command.<BR>
+/// Note that instruction command case one, two and three are implemanted.
+///
+/// !!!Contents
+///
+/// The definitions and functions provided are dispatched inside a number of
+/// files:
+/// - main.c main software
+//------------------------------------------------------------------------------
+
+
+
+/// \unit
+///
+/// !Purpose
+/// Implementation of the USB CCID.
+///
+/// !Contents
+/// The code can be roughly broken down as follows:
+/// - Configuration functions
+/// - Interrupt handlers
+/// - Utility functions
+/// - The main() function, which implements the program behavior
+/// - Use ICC insertion event() and CCID_SmartCardRequest() CCID functions
+///
+/// Please refer to the list of functions in the #Overview# tab of this unit
+/// for more detailed information.
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include <board.h>
+#include <aic/aic.h>
+#include <pio/pio.h>
+#include <pio/pio_it.h>
+#include <utility/trace.h>
+#include <utility/assert.h>
+#include <utility/led.h>
+#include <usb/device/core/USBD.h>
+#include <dbgu/dbgu.h>
+#include <usb/device/ccid/cciddriver.h>
+#include <iso7816/iso7816_4.h>
+#include <pmc/pmc.h>
+
+#include <string.h>
+
+//-----------------------------------------------------------------------------
+// Local Define
+//-----------------------------------------------------------------------------
+/// Use for power management
+#define STATE_IDLE 0
+/// The USB device is in suspend state
+#define STATE_SUSPEND 4
+/// The USB device is in resume state
+#define STATE_RESUME 5
+
+//-----------------------------------------------------------------------------
+// Local variables
+//-----------------------------------------------------------------------------
+/// State of USB, for suspend and resume
+unsigned char USBState = STATE_IDLE;
+
+/// List of pins that must be configured for use by the application.
+static const Pin pinsISO7816[] = {PINS_ISO7816};
+static const Pin pinIso7816RstMC = PIN_ISO7816_RSTMC;
+
+//------------------------------------------------------------------------------
+// Optional smartcard detection
+//------------------------------------------------------------------------------
+#ifdef PIN_SMARTCARD_CONNECT
+
+/// Smartcard detection pin.
+static const Pin pinSmartCard = PIN_SMARTCARD_CONNECT;
+
+//------------------------------------------------------------------------------
+/// PIO interrupt service routine. Checks if the smartcard has been connected
+/// or disconnected.
+//------------------------------------------------------------------------------
+static void ISR_PioSmartCard(const Pin *pPin)
+{
+ // Check all pending interrupts
+ if ((pinSmartCard.pio->PIO_ISR & pinSmartCard.mask) != 0) {
+
+ // Check current level on pin
+ if (PIO_Get(&pinSmartCard) == 0) {
+
+ CCID_Insertion();
+ }
+ else {
+
+ CCID_Removal();
+ }
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the smartcard detection pin to trigger an interrupt.
+//------------------------------------------------------------------------------
+static void ConfigureCardDetection(void)
+{
+ PIO_Configure(&pinSmartCard, 1);
+ PIO_ConfigureIt(&pinSmartCard, ISR_PioSmartCard);
+ PIO_EnableIt(&pinSmartCard);
+}
+
+#else
+
+//------------------------------------------------------------------------------
+/// Dummy implementation.
+//------------------------------------------------------------------------------
+static void ConfigureCardDetection(void)
+{
+ printf("-I- Smartcard detection not supported.\n\r");
+}
+
+#endif
+
+
+//------------------------------------------------------------------------------
+/// VBus monitoring (optional)
+//------------------------------------------------------------------------------
+#if defined(PIN_USB_VBUS)
+
+#define VBUS_CONFIGURE() VBus_Configure()
+
+/// VBus pin instance.
+static const Pin pinVbus = PIN_USB_VBUS;
+
+//------------------------------------------------------------------------------
+/// Handles interrupts coming from PIO controllers.
+//------------------------------------------------------------------------------
+static void ISR_Vbus(const Pin *pPin)
+{
+ // Check current level on VBus
+ if (PIO_Get(&pinVbus)) {
+
+ TRACE_INFO("VBUS conn\n\r");
+ USBD_Connect();
+ }
+ else {
+
+ TRACE_INFO("VBUS discon\n\r");
+ USBD_Disconnect();
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the VBus pin to trigger an interrupt when the level on that pin
+/// changes.
+//------------------------------------------------------------------------------
+static void VBus_Configure( void )
+{
+ TRACE_INFO("VBus configuration\n\r");
+
+ // Configure PIO
+ PIO_Configure(&pinVbus, 1);
+ PIO_ConfigureIt(&pinVbus, ISR_Vbus);
+ PIO_EnableIt(&pinVbus);
+
+ // Check current level on VBus
+ if (PIO_Get(&pinVbus)) {
+
+ // if VBUS present, force the connect
+ TRACE_INFO("VBUS conn\n\r");
+ USBD_Connect();
+ }
+ else {
+ USBD_Disconnect();
+ }
+}
+
+#else
+ #define VBUS_CONFIGURE() USBD_Connect()
+#endif //#if defined(PIN_USB_VBUS)
+
+#if defined (CP15_PRESENT)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ PMC_CPUInIdleMode();
+}
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+}
+
+#elif defined(at91sam7a3)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ PMC_DisableProcessorClock();
+}
+//------------------------------------------------------------------------------
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+}
+
+#elif defined (at91sam7se)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ // Voltage regulator in standby mode : Enable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR |= AT91C_VREG_PSTDBY;
+
+ PMC_DisableProcessorClock();
+}
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // Voltage regulator in normal mode : Disable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR &= ~AT91C_VREG_PSTDBY;
+
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+}
+
+#elif defined (at91sam7s)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ // Voltage regulator in standby mode : Enable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR |= AT91C_VREG_PSTDBY;
+
+ PMC_DisableProcessorClock();
+}
+
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // Voltage regulator in normal mode : Disable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR &= ~AT91C_VREG_PSTDBY;
+
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+
+}
+
+#elif defined (at91sam7x) || defined (at91sam7xc)
+//------------------------------------------------------------------------------
+/// Put the CPU in 32kHz, disable PLL, main oscillator
+/// Put voltage regulator in standby mode
+//------------------------------------------------------------------------------
+void LowPowerMode(void)
+{
+ // MCK=48MHz to MCK=32kHz
+ // MCK = SLCK/2 : change source first from 48 000 000 to 18. / 2 = 9M
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=SLCK : then change prescaler
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // disable PLL
+ AT91C_BASE_PMC->PMC_PLLR = 0;
+ // Disable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = 0;
+
+ // Voltage regulator in standby mode : Enable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR |= AT91C_VREG_PSTDBY;
+
+ PMC_DisableProcessorClock();
+}
+
+//------------------------------------------------------------------------------
+/// Put voltage regulator in normal mode
+/// Return the CPU to normal speed 48MHz, enable PLL, main oscillator
+//------------------------------------------------------------------------------
+void NormalPowerMode(void)
+{
+ // Voltage regulator in normal mode : Disable VREG Low Power Mode
+ AT91C_BASE_VREG->VREG_MR &= ~AT91C_VREG_PSTDBY;
+
+ // MCK=32kHz to MCK=48MHz
+ // enable Main Oscillator
+ AT91C_BASE_PMC->PMC_MOR = (( (AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS ) );
+
+ // enable PLL@96MHz
+ AT91C_BASE_PMC->PMC_PLLR = ((AT91C_CKGR_DIV & 0x0E) |
+ (AT91C_CKGR_PLLCOUNT & (28<<8)) |
+ (AT91C_CKGR_MUL & (0x48<<16)));
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK ) );
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+ // MCK=SLCK/2 : change prescaler first
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+ // MCK=PLLCK/2 : then change source
+ AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK ;
+ while( !( AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY ) );
+}
+
+#endif
+
+//------------------------------------------------------------------------------
+// Callbacks re-implementation
+//------------------------------------------------------------------------------
+//------------------------------------------------------------------------------
+/// Invoked when the USB device leaves the Suspended state. By default,
+/// configures the LEDs.
+//------------------------------------------------------------------------------
+void USBDCallbacks_Resumed(void)
+{
+ // Initialize LEDs
+ LED_Configure(USBD_LEDPOWER);
+ LED_Set(USBD_LEDPOWER);
+ LED_Configure(USBD_LEDUSB);
+ LED_Clear(USBD_LEDUSB);
+ USBState = STATE_RESUME;
+}
+
+//------------------------------------------------------------------------------
+/// Invoked when the USB device gets suspended. By default, turns off all LEDs.
+//------------------------------------------------------------------------------
+void USBDCallbacks_Suspended(void)
+{
+ // Turn off LEDs
+ LED_Clear(USBD_LEDPOWER);
+ LED_Clear(USBD_LEDUSB);
+ USBState = STATE_SUSPEND;
+}
+
+
+//------------------------------------------------------------------------------
+// Exported functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Initializes the CCID driver and runs it.
+/// \return Unused (ANSI-C compatibility)
+//------------------------------------------------------------------------------
+int main( void )
+{
+ // Initialize traces
+ TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
+ printf("-- USB Device CCID Project %s --\n\r", SOFTPACK_VERSION);
+ printf("-- %s\n\r", BOARD_NAME);
+ printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
+
+ // If they are present, configure Vbus & Wake-up pins
+ PIO_InitializeInterrupts(0);
+
+ // Configure IT on Smart Card
+ ConfigureCardDetection();
+
+ // Configure ISO7816 driver
+ PIO_Configure(pinsISO7816, PIO_LISTSIZE(&pinsISO7816));
+ ISO7816_Init( pinIso7816RstMC );
+
+ // USB audio driver initialization
+ CCIDDriver_Initialize();
+
+ // connect if needed
+ VBUS_CONFIGURE();
+ while (USBD_GetState() < USBD_STATE_CONFIGURED);
+
+ CCID_Insertion();
+
+ // Infinite loop
+ while (1) {
+
+ if( USBState == STATE_SUSPEND ) {
+ TRACE_DEBUG("suspend !\n\r");
+ LowPowerMode();
+ USBState = STATE_IDLE;
+ }
+ if( USBState == STATE_RESUME ) {
+ // Return in normal MODE
+ TRACE_DEBUG("resume !\n\r");
+ NormalPowerMode();
+ USBState = STATE_IDLE;
+ }
+ CCID_SmartCardRequest();
+ }
+ return 0;
+}
+
diff --git a/usb-device-ccid-project/obj/.empty b/usb-device-ccid-project/obj/.empty
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/usb-device-ccid-project/obj/.empty
personal git repositories of Harald Welte. Your mileage may vary