openpcd - Firmware for the OpenPCD, OpenPICC and SIMtrace hardware

	Commit message (Collapse)	Author	Age	Files	Lines
*	fix linking issue with latest binutils versionsv0.3	Bjoern Kerler	2011-10-21	1	-1/+1
\|
*	simtrace: add more definitions regarding real hw prototype	Harald Welte	2011-06-16	1	-0/+3
\|
*	On the Olimex board, the buttons are low-active	Harald Welte	2010-11-13	1	-1/+7
\| \| \| \| \|	Thus, we need to invert our check during the dfu / main dual boot decision
*	- introduce FIQ stack of 1k (way too large, but we might have debug...)	laforge	2006-09-30	1	-20/+17
\| \| \| \| \| \| \|	- move FIQ processing out of DFU Flash and into application/RAM git-svn-id: https://svn.openpcd.org:2342/trunk@239 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	- Implement runtime DFU switching and reset-after-update. This means	laforge	2006-09-23	1	-0/+24
\| \| \| \| \| \| \|	we can now reflash without any buttons or replugging of the device git-svn-id: https://svn.openpcd.org:2342/trunk@222 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	- move large rctx definitions to req_ctx.h	laforge	2006-09-22	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	- add more fine-grained debugging macros in pcd_enumarate.c - resolve race conditions between main-loop ep_refill and irq-triggered ep_refill by adding one irq-[b]locking variant - consolidate endpoint reset code into reset_ep() - add code to handle correct transmission and reception of usb transfers larger than endpoint size - use new jump address (0x104000) in DFU Cstartup.S - move main_usb to pcd subdirectory - fix include/compile.h make dependencies - make usb benchmark code use new large req_ctx git-svn-id: https://svn.openpcd.org:2342/trunk@219 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	DFU works (fix various bugs such as forgetting to shift the page number, ↵	laforge	2006-09-21	1	-1/+8
\| \| \| \| \| \|	checking for invalid page numbers, off-by-one error in flash page calculation, etc.) git-svn-id: https://svn.openpcd.org:2342/trunk@215 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	- fix linker scripts and Cstartup.S to correctly relocate shared data	laforge	2006-09-20	1	-1/+1
\| \| \| \|	git-svn-id: https://svn.openpcd.org:2342/trunk@207 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	- fix relocation of _data_shared segment	laforge	2006-09-20	1	-7/+26
\| \| \| \|	git-svn-id: https://svn.openpcd.org:2342/trunk@205 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	add GPL disclaimer to all C files that I wrote	laforge	2006-09-13	1	-0/+19
\| \| \| \|	git-svn-id: https://svn.openpcd.org:2342/trunk@195 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	Completely separate DFU from application program, we now have a real bootloader.	laforge	2006-09-13	1	-175/+173
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	DFU occupies 0x00100000 - 0x00100fff in flash, application starts at 0x00101000. DFU also occupies the first couple of bytes in SRAM, application starts at 0x00200024. In order to produce a samba-flashable image, first build dfu.bin by typing 'make -f Makefule.dfu', succeeded by 'make TARGET=... DEBUG=... BOARD=...' and then concatenating the two files together, e.g. cat dfu.bin main_reqa.bin > flash.bin. Actual flashing via DFU is still not operational, but will be implemented next git-svn-id: https://svn.openpcd.org:2342/trunk@194 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
*	move to new directory	laforge	2006-09-12	1	-0/+386
	git-svn-id: https://svn.openpcd.org:2342/trunk@191 6dc7ffe9-61d6-0310-9af1-9938baff3ed1