summaryrefslogtreecommitdiff
path: root/firmware
Commit message (Collapse)AuthorAgeFilesLines
* convert from u_int*_t to uint*_tHarald Welte2015-09-2871-613/+614
|
* improve handling of spurious IRQsMin Xu2014-11-111-6/+21
| | | | | rather than printing directly from the interrupt handler, just increment the number and print it from the main loop function instead.
* Allow some USB interrupts to be handled during dbgu_appendMin Xu2014-11-111-1/+3
|
* Retrieve + print previous PC from stack to debug wdog/spurious IRQMin Xu2014-11-112-3/+31
| | | | | | | | | | | Retrive previous PC from the stack before entering specific interrupt handler routines. Allow user to trace where interrupt occured: e.g. WatchDog and Spurious interrupt Prior to this change, spurious interrupt would occur so much (observed via gdb/remote debug) so it appears that the board stalled. Once a custom spurious interrupt installed, the code continues after the interrupt instead of re-entering the interrupt.
* Don't split req_ctx with ATR payloadMin Xu2014-11-111-1/+4
| | | | | | | | | | | | | The codnition for flushing a req_ctx on UART idle is fixed to flush only if 1) There has been no new data since last check, and 2) There are no req_ctx currently pending to be transmitted to USB, and 3) We did NOT just got a reset and waiting for ATR I saw an ATR split in two different req_ctx prior, presumably flush decided to send req_ctx after ATR but got a new character just before sent). If we did get a RESET, let original logic decide to send the req_ctx -- presumably when ATR data is fully received.
* iso_uart: Print more errors, not just overrunsMin Xu2014-11-113-4/+10
|
* change number + qty of small/large req_ctxMin Xu2014-11-112-12/+7
|
* pcd_enumerate: More complete USB endpoint resettingMin Xu2014-11-111-9/+7
|
* req_ctx: Keep statistic about number of req_ctx in given stateMin Xu2014-11-113-4/+19
| | | | ... and print this from a debug statement.
* Ensure to transmit current req_ctx on RESET/VCC eventsMin Xu2014-11-114-2/+31
| | | | | | | | | | | | | | | | | | When any of the following events occur: * VCC_PHONE off * nRST * RST we tranmsit the current req_ctx, if there is data pending. This ensures that for any successive data, the ATR flag in the next req_ctx containing the data, not in the previous req_ctx. It also ensures that the ATR is aligned at 0 offset in the new req_ctx, which is an assumption the host software makes but the previous code didn't ensure. Furthermore, we introduce a periodic flushing of any pending but incomplete req_ctx.
* iso7816_uart.h: add missing #ifdef/endif to avoid multiple inclusionMin Xu2014-11-111-0/+4
|
* usbcmd_generic: Add missing \r to DEBUGP()Min Xu2014-11-111-1/+1
|
* watchdog: print watchdog expiration even in non-debug buildsMin Xu2014-11-111-2/+2
|
* pcd_enumerate: Avoid disabling interrupt during endpoint refillMin Xu2014-11-111-25/+28
| | | | | | | | | The old implementation has a big local_irq_save() / restore() around the endpoint re-fill routine. This disables interrupts for a long time, psossibly causing lost interrupts. The new implementation works around this by disabling the USB (UDP) interrupt only, rather than disabling all interrupts on the system.
* simtrace: Add heartbeat message to debug consoleMin Xu2014-11-113-0/+20
|
* dbgu: make debug routines re-entrantMin Xu2014-11-113-120/+193
|
* req_ctx: Change number of small / large req_ctxMin Xu2014-11-111-1/+5
|
* req_ctx: avoid loop iterations by introducing per-state queuesMin Xu2014-11-112-23/+120
| | | | | | In order to speed up the lookup of req_ctx, we keep per-state queues rather than iterating over all the request contexts that exist again and again.
* change req_ctx sizes large 2048->1000; small 128->270Min Xu2014-11-111-2/+2
|
* req_ctx: Use consistent numeric range for REQ_CTX_STATEMin Xu2014-11-112-21/+24
| | | | | ... which will allow us to check for invalid states by a simple 'greater than' check later on.
* update main_factory to write version 1,4,0 instead of 1,3,0 to OTPHarald Welte2014-11-111-1/+1
|
* simtrace: main_factory: Program OTP area with simtrace versionHarald Welte2013-11-172-4/+23
|
* simtrace: Add OTP data containing production dataHarald Welte2013-11-172-0/+112
|
* spi_flash: add code for OTP read/writeHarald Welte2013-11-172-18/+251
|
* iso7816_uart: Make sure ATR is separated from normal APDU in all casesHarald Welte2012-05-181-7/+12
| | | | | Prior to this patch, the ATR was not send in a separate USB message for cards that are T=0 only.
* 7816_uart: add comment about f/d calculationHarald Welte2012-05-181-0/+2
|
* eabi: Remove EABI functions to fix building with EABI toolchainsHolger Freyther2012-04-081-99/+0
| | | | | | | | | | | | | | | | | These symbols are not referenced on an arm-elf gcc 4.7, they are used when building with an arm-eabi gcc 4.7 and then cause linking issues. The linking to libgcc can not be omitted as the irq code is using ffs. Remove the EABI symbols. The alternative would be to declare the EABI as weak inside the lib1funcs. Link error: multiple definition of `__udivsi3' multiple definition of `__aeabi_uidiv' Exported symbols: nm lib/lib1funcs.o 00000000 t Ldiv0 00000010 T __div0
* simtrace: introduce statisticsv0.5Harald Welte2012-03-234-2/+70
| | | | | | the statistics count various events like overruns, parity errors, missing rctx and can dump those stats via USB as well as on the serial console.
* wdt: make sure WDT doesn't fire inadvertentlyHarald Welte2012-03-221-6/+13
| | | | We have to set WDD and WDV to the same value to avoid watchdog errors
* simtrace: implement SIM power switching APIHarald Welte2012-03-222-18/+48
| | | | | | | | | there is now a high-level command by which we can swithc the VCC supply of the SIM cards. For some reason, the _PASS variant (passing through the voltage from the phone) doesn't seem to work reliably. It might be that we are draining reverse current throught the LDO once we supply SIM power that way.
* make VCC / card detect more reliableHarald Welte2012-03-221-2/+2
|
* disable logging of PIO status in PIO interrupt routineHarald Welte2012-03-221-1/+1
|
* simtrace: Inform host of Fi/Di values (and flag change due to PPS)Harald Welte2012-02-122-0/+6
|
* simtrace: 7816 UART: Add missing entry in Di tableSylvain Munaut2012-01-261-1/+1
| | | | | | Add missing entry in Fi_table. It's apparently used as '64' in some reader and 'unsupported' in some other. For simtrace I guess we should consider it 64.
* Make sure we don't forward power _and_ supply SIM power at the same timeKevin Redon2011-12-182-1/+20
| | | | | | | | The FPF2005 has no reverse voltage blocker, this is why the 3.3V from the LDO flows back into VCC_PHONE. It even damages the chip (so says the datasheet) I corrected the double power source problem by disabling the LDO (see patch), but still 1.8V does not work and 3.0-3.3V is used. I have to look for other reasons.
* usb: Do not send ZLP when we have filled the windowv0.4Holger Hans Peter Freyther2011-12-143-49/+53
| | | | | | | | | | | | Only send the ZLP if we send less data than was required/asked for by the host and it is a multiple of the bMaxPacketSize0 (which is hardcoded to 8 right now). This is completing the change done in fe88b83e80df8be0351ff38ee6 to fix SIMtrace attached to OSX and not regress on windows. Introduce another parameter to udp_ep0_send_data to specify the window size (wLength) or if not available the default from USB 2.0 specification.
* dfu: Remove unused variable, mark method as not retuningHolger Hans Peter Freyther2011-11-102-3/+2
|
* dfu: Use {} for possible empty if statement (in case debug is off)Holger Hans Peter Freyther2011-11-101-1/+3
| | | | src/dfu/dfu.c:853:23: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
* dfu: Mark unsued variables as __unused for nowHolger Hans Peter Freyther2011-11-102-4/+6
|
* dfu: udp_ep0_recv_clean is static and is not called anywhereHolger Hans Peter Freyther2011-11-101-14/+0
|
* dfu: The i variable to disable interrupts shadows the outer indexHolger Hans Peter Freyther2011-11-101-3/+3
| | | | | | | | In case ram_app_entry() returns do not reset i to 32, otherwise we will never reset the watchdog. src/dfu/dfu.c:1077:7: warning: declaration of ‘i’ shadows a previous local [-Wshadow] src/dfu/dfu.c:1068:6: warning: shadowed declaration is here [-Wshadow]
* fix linking issue with latest binutils versionsv0.3Bjoern Kerler2011-10-211-1/+1
|
* Fix fi/di calculation for certain mobiles like GT-S770 or HTC RaphaelBjoern Kerler2011-10-211-3/+3
| | | | | There were some mistakes while copying the tables from ISO 7816-3, and also a quite old version of 7816-3 was used.
* Update TODO fileHarald Welte2011-08-161-5/+0
|
* SIMTRACE: ISO7816: Deal with ATR that don't have historical bytesv0.2Harald Welte2011-08-161-11/+21
| | | | | In case there are no historical bytes, we immediately transition from the last TD byte into the WAIT_TCK or WAIT_APDU state.
* ISO7816: Properly handle T=0 only cards without TCK in ATRHarald Welte2011-08-161-1/+13
|
* SIMTRACE UART: Reset error status on error related IRQHarald Welte2011-08-151-0/+9
| | | | | This prevents an IRQ-flood after a parity or overrun error, which in turn would cause a watchdog reset.
* simtrace UART: set INACK flag to make sure we ignore any parity errorHarald Welte2011-08-151-3/+3
| | | | | | | As a SIM card tracer, we want to remain completely passive and thus not signal back parity errors with the ISO 7816 NACK. The UART INACK flag does exactly that...
* DBGU: Print Reset controller Status Register on bootHarald Welte2011-08-151-0/+4
| | | | This helps us to discover _why_ the CPU has been rebooted.
* USB: Add support for the 3rd DFU interface (RAM)Harald Welte2011-08-151-0/+6
|
personal git repositories of Harald Welte. Your mileage may vary