sdr-test-project has moved to osmo-sdr.git

6 files changed, 0 insertions, 423 deletions

diff --git a/sdr-test-project/Makefile b/sdr-test-project/Makefile
deleted file mode 100644
index 7072572..0000000
--- a/sdr-test-project/Makefile
+++ /dev/null
@@ -1,226 +0,0 @@
-# ----------------------------------------------------------------------------

-#         ATMEL Microcontroller Software Support 

-# ----------------------------------------------------------------------------

-# Copyright (c) 2008, Atmel Corporation

-#

-# All rights reserved.

-#

-# Redistribution and use in source and binary forms, with or without

-# modification, are permitted provided that the following conditions are met:

-#

-# - Redistributions of source code must retain the above copyright notice,

-# this list of conditions and the disclaimer below.

-#

-# Atmel's name may not be used to endorse or promote products derived from

-# this software without specific prior written permission.

-#

-# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

-# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

-# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-# ----------------------------------------------------------------------------

-

-# 	Makefile for compiling basic-ssc-i2s-at73c213-project

-

-#-------------------------------------------------------------------------------

-#		User-modifiable options

-#-------------------------------------------------------------------------------

-

-# Chip & board used for compilation

-# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)

-CHIP  = at91sam3u4

-BOARD = osmo-sdr

-

-# Trace level used for compilation

-# (can be overriden by adding TRACE_LEVEL=#number to the command-line)

-# TRACE_LEVEL_DEBUG      5

-# TRACE_LEVEL_INFO       4

-# TRACE_LEVEL_WARNING    3

-# TRACE_LEVEL_ERROR      2

-# TRACE_LEVEL_FATAL      1

-# TRACE_LEVEL_NO_TRACE   0

-TRACE_LEVEL = 5

-

-# Optimization level, put in comment for debugging

-#OPTIMIZATION = -Os

-

-# AT91 library directory

-AT91LIB = ../../at91lib

-

-# External library

-EXT_LIBS= ../external_libs

-

-# Output file basename

-OUTPUT = osmo-sdr-test-$(BOARD)-$(CHIP)

-

-# Compile with chip specific features

-include $(AT91LIB)/boards/$(BOARD)/$(CHIP)/chip.mak

-

-# Compile for all memories available on the board (this sets $(MEMORIES))

-include $(AT91LIB)/boards/$(BOARD)/board.mak

-

-# Output directories

-BIN = bin

-OBJ = obj

-

-#-------------------------------------------------------------------------------

-#		Tools

-#-------------------------------------------------------------------------------

-

-# Tool suffix when cross-compiling

-CROSS_COMPILE = arm-cm3-eabi-

-

-# Compilation tools

-CC = $(CROSS_COMPILE)gcc

-SIZE = $(CROSS_COMPILE)size

-STRIP = $(CROSS_COMPILE)strip

-OBJCOPY = $(CROSS_COMPILE)objcopy

-

-# Flags

-INCLUDES += -I$(AT91LIB)/boards/$(BOARD)

-INCLUDES += -I$(AT91LIB)/peripherals

-INCLUDES += -I$(AT91LIB)/components

-INCLUDES += -I$(AT91LIB)/drivers

-INCLUDES += -I$(AT91LIB)

-INCLUDES += -I../../osmo-sdr/firmware/include
-INCLUDES += -I$(AT91LIB)/memories

-INCLUDES += -I.

-INCLUDES += -I$(EXT_LIBS)

-INCLUDES += -I$(EXT_LIBS)/cmsis
-

-ifeq ($(CHIP_CORE), cortexm3)

-TARGET_OPTS = -mcpu=cortex-m3 -mthumb

-else

-TARGET_OPTS =

-endif

-

-CFLAGS += $(TARGET_OPTS)

-CFLAGS += -Wall -mlong-calls -ffunction-sections -fno-exceptions

-CFLAGS += -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL)

-ASFLAGS = $(TARGET_OPTS) -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__

-LDFLAGS = -g $(OPTIMIZATION) -nostartfiles $(TARGET_OPTS) -Wl,--gc-sections

-

-#-------------------------------------------------------------------------------

-#		Files

-#-------------------------------------------------------------------------------

-

-# Directories where source files can be found

-PERIPH = $(AT91LIB)/peripherals

-BOARDS = $(AT91LIB)/boards

-UTILITY = $(AT91LIB)/utility

-COMP = $(AT91LIB)/components

-DRIVER = $(AT91LIB)/drivers

-MEM = $(AT91LIB)/memories

-MEM = $(EXT_LIBS)/memories

-

-VPATH += $(UTILITY)

-VPATH += $(PERIPH)/dbgu

-VPATH += $(PERIPH)/pio

-VPATH += $(PERIPH)/irq

-VPATH += $(PERIPH)/ssc

-VPATH += $(PERIPH)/twi

-VPATH += $(PERIPH)/pmc

-VPATH += $(PERIPH)/cp15

-VPATH += $(BOARDS)/$(BOARD)

-VPATH += $(BOARDS)/$(BOARD)/$(CHIP)

-#VPATH += $(PERIPH)/mci

-VPATH += $(DRIVER)/twi

-#VPATH += $(MEM)/sdmmc

-VPATH += $(PERIPH)/dma

-VPATH += $(DRIVER)/dmad

-VPATH += $(FATFS)/src

-VPATH += $(MEM)

-VPATH += $(EXT_LIBS)/cmsis

-VPATH += ../../osmo-sdr/firmware/src
-

-# Objects built from C source files

-C_OBJECTS += main.o

-C_OBJECTS += stdio.o

-C_OBJECTS += math.o

-C_OBJECTS += dbgu.o

-C_OBJECTS += pio.o

-C_OBJECTS += ssc.o

-C_OBJECTS += twi.o

-C_OBJECTS += pmc.o

-C_OBJECTS += twid.o

-C_OBJECTS += board_lowlevel.o

-C_OBJECTS += trace.o
-C_OBJECTS += led.o
-C_OBJECTS += board_memories.o

-
-C_OBJECTS += logging.o
-C_OBJECTS += tuner_e4k.o
-C_OBJECTS += tuner_e4k_transport.o
-C_OBJECTS += si570.o
-C_OBJECTS += osdr_fpga.o
-
-

-# Objects for different chips

-ifeq ($(CHIP_CORE), cortexm3)

-C_OBJECTS += nvic.o

-C_OBJECTS += exceptions.o

-C_OBJECTS += board_cstartup_gnu.o

-C_OBJECTS += core_cm3.o

-else

-C_OBJECTS += aic.o

-C_OBJECTS += cp15.o

-C_OBJECTS += pit.o

-endif

-

-ifeq ($(CHIP_IP_MCI), MCI_DMA)

-C_OBJECTS += dmad.o

-C_OBJECTS += dma.o

-#C_OBJECTS += mci_hs.o

-else

-C_OBJECTS += mci.o

-endif

-

-# Objects built from Assembly source files

-ifneq ($(CHIP_CORE), cortexm3)

-ASM_OBJECTS += board_cstartup.o

-ASM_OBJECTS += cp15_asm.o

-endif

-

-# Append OBJ and BIN directories to output filename

-OUTPUT := $(BIN)/$(OUTPUT)

-

-#-------------------------------------------------------------------------------

-#		Rules

-#-------------------------------------------------------------------------------

-

-all: $(BIN) $(OBJ) $(MEMORIES)

-

-$(BIN) $(OBJ):

-	mkdir $@

-

-define RULES

-C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))

-ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))

-

-$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))

-	$(CC) $(LDFLAGS) -T"$(AT91LIB)/boards/$(BOARD)/$(CHIP)/$$@.lds" -o $(OUTPUT)-$$@.elf $$^

-	$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin

-	$(SIZE) $$^ $(OUTPUT)-$$@.elf

-

-$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)

-	$(CC) $(CFLAGS) -D$(1) -c -o $$@ $$<

-

-$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)

-	$(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<

-

-debug_$(1): $(1)

-	perl ../resources/gdb/debug.pl $(OUTPUT)-$(1).elf

-

-endef

-

-$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))

-

-clean:

-	-rm -f $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf

-

diff --git a/sdr-test-project/bin/.empty b/sdr-test-project/bin/.empty
deleted file mode 100644
index e69de29..0000000
--- a/sdr-test-project/bin/.empty
+++ /dev/null
diff --git a/sdr-test-project/bin/.empty_dir b/sdr-test-project/bin/.empty_dir
deleted file mode 100644
index e69de29..0000000
--- a/sdr-test-project/bin/.empty_dir
+++ /dev/null
diff --git a/sdr-test-project/main.c b/sdr-test-project/main.c
deleted file mode 100644
index 5e55b7b..0000000
--- a/sdr-test-project/main.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/* ----------------------------------------------------------------------------

- *         ATMEL Microcontroller Software Support 

- * ----------------------------------------------------------------------------

- * Copyright (c) 2008, Atmel Corporation

- *

- * All rights reserved.

- *

- * Redistribution and use in source and binary forms, with or without

- * modification, are permitted provided that the following conditions are met:

- *

- * - Redistributions of source code must retain the above copyright notice,

- * this list of conditions and the disclaimer below.

- *

- * Atmel's name may not be used to endorse or promote products derived from

- * this software without specific prior written permission.

- *

- * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

- * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

- * ----------------------------------------------------------------------------

- */

-

-#include <board.h>

-#include <board_memories.h>

-#include <pio/pio.h>

-#include <irq/irq.h>

-#include <twi/twid.h>

-#include <twi/twi.h>

-#include <dbgu/dbgu.h>

-#include <ssc/ssc.h>

-#include <utility/assert.h>

-#include <utility/math.h>

-#include <utility/trace.h>

-#include <utility/led.h>

-

-#include <string.h>

-

-#include <dmad/dmad.h>

-#include <dma/dma.h>

-

-#include <tuner_e4k.h>

-#include <si570.h>

-

-#define SSC_MCK    49152000

-

-// TWI clock

-#define TWI_CLOCK       100000

-

-// PMC define

-#define AT91C_CKGR_PLLR     AT91C_CKGR_PLLAR

-#define AT91C_PMC_LOCK      AT91C_PMC_LOCKA

-

-#define AT91C_CKGR_MUL_SHIFT         16

-#define AT91C_CKGR_OUT_SHIFT         14

-#define AT91C_CKGR_PLLCOUNT_SHIFT     8

-#define AT91C_CKGR_DIV_SHIFT          0

-

-#define E4K_I2C_ADDR 		0x64

-#define SI570_I2C_ADDR 		0x55

-

-//------------------------------------------------------------------------------

-//         Local variables

-//------------------------------------------------------------------------------

-

-/// List of pins to configure.

-static const Pin pins[] = {PINS_TWI0, PIN_PCK0, PINS_LEDS,

-			   PINS_MISC, PINS_SSC, PINS_FPGA_JTAG};

-

-static Twid twid;

-static struct e4k_state e4k;

-static struct si570_ctx si570;

-

-static void set_si570_freq(uint32_t freq)

-{

-	si570_set_freq(&si570, freq/1000, 0);

-	e4k.vco.fosc = freq;

-}

-

-static void power_peripherals(int on)

-{

-	if (on) {

-		osdr_fpga_power(1);

-		sam3u_e4k_power(&e4k, 1);

-		sam3u_e4k_stby(&e4k, 0);

-	} else {

-		osdr_fpga_power(0);

-		sam3u_e4k_stby(&e4k, 1);

-		sam3u_e4k_power(&e4k, 0);

-	}

-}

-

-static void DisplayMenu(void)

-{

-	printf("Menu:\r\n"

-		"[0] fpga+rf power on\r\n"

-		"[1] si570 init\r\n"

-		"[2] e4k init\r\n"

-		"[f] si570 30MHz freq\r\n"

-		"[r] si570 regdump\r\n"

-		"[q] 100 MHz\r\n"

-		"[w] 101 MHz\r\n"

-		"\r\n"

-		);

-}

-

-//------------------------------------------------------------------------------

-/// Main function

-//------------------------------------------------------------------------------

-int main(void)

-{

-    unsigned char key;

-    unsigned char isValid;

-

-    // Configure all pins

-    PIO_Configure(pins, PIO_LISTSIZE(pins));

-

-    LED_Configure(0);

-    LED_Set(0);

-    LED_Configure(1);

-    LED_Set(1);

-

-    // Initialize the DBGU

-    TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);

-

-    printf("trace configured!!\n");

-

-    // Switch to Main clock

-    AT91C_BASE_PMC->PMC_MCKR = (AT91C_BASE_PMC->PMC_MCKR & ~AT91C_PMC_CSS) | AT91C_PMC_CSS_MAIN_CLK;

-    while ((AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) == 0);

-

-    // Configure PLL to 98.285MHz

-    *AT91C_CKGR_PLLR = ((1 << 29) | (171 << AT91C_CKGR_MUL_SHIFT) \

-        | (0x0 << AT91C_CKGR_OUT_SHIFT) |(0x3f << AT91C_CKGR_PLLCOUNT_SHIFT) \

-        | (21 << AT91C_CKGR_DIV_SHIFT));

-    while ((AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) == 0);

-

-    // Configure master clock in two operations

-    AT91C_BASE_PMC->PMC_MCKR = (( AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLLA_CLK) & ~AT91C_PMC_CSS) | AT91C_PMC_CSS_MAIN_CLK;

-    while ((AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) == 0);

-    AT91C_BASE_PMC->PMC_MCKR = ( AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLLA_CLK);

-    while ((AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) == 0);

-

-    // DBGU reconfiguration

-    DBGU_Configure(DBGU_STANDARD, 115200, SSC_MCK);

-

-    // Configure and enable the TWI (required for accessing the DAC)

-    *AT91C_PMC_PCER = (1<< AT91C_ID_TWI0); 

-    TWI_ConfigureMaster(AT91C_BASE_TWI0, TWI_CLOCK, SSC_MCK);

-    TWID_Initialize(&twid, AT91C_BASE_TWI0);

-

-    printf("-- osmo-sdr testing project %s --\n\r", SOFTPACK_VERSION);

-    printf("-- %s\n\r", BOARD_NAME);

-    printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);

-

-    // Enter menu loop

-    while (1) {

-

-        // Display menu

-        DisplayMenu();

-

-        // Process user input

-        key = DBGU_GetChar();

-

-	switch (key) {

-	case '0':

-		power_peripherals(1);

-		break;

-	case '1':

-		si570_init(&si570, &twid, SI570_I2C_ADDR);

-		break;

-	case '2':

-		sam3u_e4k_init(&e4k, &twid, E4K_I2C_ADDR);

-		e4k_init(&e4k);

-		break;

-	case 'f':

-		set_si570_freq(30000000);

-		break;

-	case 'r':

-		si570_regdump(&si570);

-		break;

-	case 'q':

-		e4k_tune_freq(&e4k, 100000000);

-		break;

-	case 'w':

-		e4k_tune_freq(&e4k, 101000000);

-		break;

-	}

-    }

-}

-

diff --git a/sdr-test-project/obj/.empty b/sdr-test-project/obj/.empty
deleted file mode 100644
index e69de29..0000000
--- a/sdr-test-project/obj/.empty
+++ /dev/null
diff --git a/sdr-test-project/obj/.empty_dir b/sdr-test-project/obj/.empty_dir
deleted file mode 100644
index e69de29..0000000
--- a/sdr-test-project/obj/.empty_dir
+++ /dev/null